Polymer Science and Applications

No abstract yet.

• NURİ BÜLENT ERSOY

No abstract yet.

• NURSEL ALTAN ÖZBEK

No abstract yet.

• ONUR ÖZBEK

No abstract yet.

• ADEM ÇİÇEK

The friction and wear performance of pure polyetheretherketone (PEEK) and 30% carbon fiber-reinforced PEEK composite were comparatively evaluated under dry sliding and water drops lubrication. The sliding experiments were carried out on a pin-on-disc tribometer. The contact configuration used was a polymer pin on a ro…

• HÜSEYİN ÜNAL
• UĞUR ŞEN

The friction and wear performance of pure polyetheretherketone (PEEK) and 30% carbon fiber-reinforced PEEK composite were comparatively evaluated under dry sliding and water drops lubrication. The sliding experiments were carried out on a pin-on-disc tribometer. The contact configuration used was a polymer pin on a ro…

• HÜSEYİN ÜNAL

No abstract yet.

• İSMAİL SARAÇ

No abstract yet.

• HAMİT ADİN

In this study, the shear strength and thermal properties of the adhesively bonded joints were investigated of adhesives reinforced with nanoparticles using carbon fiber-reinforced composite materials. The diglycidyl ether bisphenol A (DGEBA) was used as the epoxy resin. Single lap joint tests of 1% wt. Multi-walled ca…

• MURAT KOYUNBAKAN

In this study, the shear strength and thermal properties of the adhesively bonded joints were investigated of adhesives reinforced with nanoparticles using carbon fiber-reinforced composite materials. The diglycidyl ether bisphenol A (DGEBA) was used as the epoxy resin. Single lap joint tests of 1% wt. Multi-walled ca…

• MÜRSEL EKREM

No abstract yet.

• ADNAN AKKURT

In this study, production and mechanical properties of polymer composite materials obtained by using Al2O3, SiO2, MgO and TiO2 hard ceramic fillers were studied. Epoxy resin was used as the matrix material, and four different ceramic powders were mechanically mixed into the resin at 3% and 5% as reinforcement. The mec…

• YELDA AKÇİN ERGÜN