İçeriğe geç
akaturk Akademik ölçüm
Giriş yap Kayıt ol

OpenAlex konusu

Polymer Science and Applications

Bu sayfa OpenAlex konu etiketine göre çalışmaları ve o konuda görünen akademisyenleri listeler. YÖKSİS temel alan / yan dal değildir.

OpenAlex 406 eser 1 yazar konusu

Çalışmalar

406 eser

  1. Mechanisms generating residual stresses and distortion during manufacture of polymer matrix composite structures 2006
    YÖKSİS SJR Q1 JCR Q1 OpenAlex üst %10 OpenAlex 94.8%

    Özet henüz yok.

  2. Pyrolysis of waste high density polyethylene (HDPE) and low density polyethylene (LDPE) plastics and production of epoxy composites withtheir pyrolysis chars 2017
    YÖKSİS SJR Q1 JCR Q1 OpenAlex üst %10 OpenAlex 98.1%

    Özet henüz yok.

  3. Comparison of different finishing polishing systems on surface roughness and gloss of resin composites 2011
    YÖKSİS SJR Q1 JCR Q1 OpenAlex üst %1 OpenAlex 99.2%

    Özet henüz yok.

  4. Tribological studies of polyamide 6 and high density polyethylene blends filled with PTFE and copper oxide and reinforced with short glass fibers 2002
    YÖKSİS SJR Q1 JCR Q1 OpenAlex üst %10 OpenAlex 94.4%

    Özet henüz yok.

  5. Mechanical and thermal behavior of non crimp glass fiber reinforced layered clay epoxy nanocomposites 2007
    YÖKSİS SJR Q1 JCR Q1 OpenAlex 85.1%

    Özet henüz yok.

  6. The Influence of Micro and Nano Filler Content on yhe Mechanical Proreties of Epoxy Composites 2015
    YÖKSİS SJR Q2 JCR Q4 OpenAlex üst %10 OpenAlex 98.1%

    In this study, the influence of micro-and nano-filler content on the mechanical properties of epoxy composites was studied.The matrix material is epoxy; the micro-fillers are Al 2 O 3 , TiO 2 and fly ash added in 10 wt% to 30 wt% by weight ratio; the nano-fillers are Al 2 O 3 , TiO 2 and clay added in 2.5 wt% to 10 wt…

  7. The Effect Of A Modeling Resin And Thermocycling On The Surface Hardness Roughness And Color Of Different Resin Composites 2013
    YÖKSİS SJR Q2 JCR Q4 OpenAlex üst %10 OpenAlex 97.2%

    STATEMENT OF PROBLEM: The application of modeling resin could affect the surface quality and color of resin composites. PURPOSE: To evaluate the effects of modeling resin on the microhardness, roughness, and color of composite restorations, with and without thermocycling. METHODS: Sixty disc-shaped specimens for each…

  8. The effect of length and concentration of glass fibers on the mechanical properties of an injection and a compression molded denture base polymer 2003
    YÖKSİS SJR Q1 JCR Q4 OpenAlex 88.7%

    Özet henüz yok.

  9. Effect of finishing and polishing procedures on the surface roughness of new tooth coloured restoratives 2003
    YÖKSİS SJR Q1 JCR Q4 OpenAlex üst %10 OpenAlex 97.7%

    The purpose of this study was to evaluate the effect of various finishing and polishing procedures on the surface roughness of three new tooth-coloured restorative materials. The materials included a hybrid composite resin (Filtek Z250), a packable composite resin (Filtek P60), and an ormocer (organically modified cer…

  10. Evaluation of the surface hardness roughness gloss and color of composites after different finishing polishing treatments and thermocycling using a multitechnique approach 2016
    YÖKSİS SJR Q1 JCR Q4 OpenAlex üst %10 OpenAlex 92.7%

    The objectives of this study were to evaluate the mechanical and physical properties of resin composites. The materials evaluated were the Clearfil Majesty Posterior, Filtek Z550 and G-aenial Posterior composites. A total of 189 specimens were fabricated for microhardness, roughness, gloss and color tests. The specime…

  11. Effect of cutting conditions on wear performance of cryogenically treated tungsten carbide inserts in dry turning of stainless steel 2016
    YÖKSİS SJR Q1 JCR Q1 OpenAlex 88.9%

    Özet henüz yok.

  12. Effect of cutting conditions on wear performance of cryogenically treated tungsten carbide inserts in dry turning of stainless steel 2016
    YÖKSİS SJR Q1 JCR Q1 OpenAlex 88.9%

    Özet henüz yok.

Akademisyenler

1 akademisyen