Evaluation of different ozonation on aflatoxin degradation and physicochemical characteristics of hazelnuts

OpenAlex English

Hazelnut contaminated with aflatoxin (5, 10, 25, and 50 ppb) were treated ozone at three different doses and two exposure times (5, 10, and 20 ppm for 10 and 20 min) on aflatoxin degradation. The highest peroxide value was reached (12.89 meqO2/kg) 20 ppm/20 min, and the lowest was 5 ppm/20 min (3.20 meqO2/kg). The reductions of α-tocopherol were 15.38%–28.87%, when control 19.14%, and the highest reduction were ozone concentration had adverse effect on α-tocopherol (24.96% 20 ppm/10 min), 28.87% (20 ppm/20 min). Ozonation was not lead to significant changes in color (L*, a*, and b*) and textures. Decrease in aflatoxin B1(AFB1) contents was dependent on increasing ozone concentration, the highest degradation for AFB1(38.96%) and total aflatoxins(31.35%) were obtained with use of 20 ppm/20 min ozonation. At 5 µg/kg contaminated group, the AFB1 reduction rate was 19.88% for 5.min and 32.23% for 20 min. Ozonation, especially 5 ppm is innovative for reducing aflatoxin, while maintaining the quality. Practical applications The effect of different ozone treatments on the degradation of the aflatoxin (AFB1), which was produced by mold growth on hazelnuts’ physicochemical characteristics, was determined. It is essential that ozonation with low concentration and short application time is needed to minimize the destruction to tocopherols and specific nutrition. The current research aimed to determine the lowest optimal dose of detoxification using different amounts of ozone and exposure time on the different amounts of AFB1.In addition, the effects of ozone applications on the physicochemical characteristics of nuts were also determined.