activated carbon and charcoal

No abstract yet.

• NADİR AYRILMIŞ

No abstract yet.

• SELHAN KARAGÖZ

No abstract yet.

• KUBİLAY TEKİN

No abstract yet.

• KORAY ALPER

No abstract yet.

• MURAT ERDEM

Paulownia wood was used as a raw material in the preparation of activated carbon by chemical activation with phosphoric acid. The conversion of wood into activated carbon consists of sample preparation, impregnation, carbonization, and finishing. Mass changes associated with the impregnation, filtration, carbonization…

• DERYA YILDIZ

Paulownia wood was used as a raw material in the preparation of activated carbon by chemical activation with phosphoric acid. The conversion of wood into activated carbon consists of sample preparation, impregnation, carbonization, and finishing. Mass changes associated with the impregnation, filtration, carbonization…

• YUNUS EMRE ŞİMŞEK

Activated carbons were prepared from poplar sawdust by chemical activation using ZnCl2, H3PO4 or KOH. The influence of activating agents, carbonization temperatures ranging from 500 ºC to 800 ºC, and mass ratio of chemical agent to precursor (1:1 and 2:1) on the porosity of activated carbons were studied. The properti…

• FUNDA ATEŞ

Charcoal is an important product of pyrolysis of biomass sources. Charcoal can be used for domestic, agricultural, metallurgical, and chemical purposes. In this study different characteristics of charcoal one of the rape seed plant straw-stalk pyrolysis product was researched and presented as candidates.

ABSTRACT Activated carbons have been widely used as adsorbents in the separation and purification processes for gaseous or aqueous solution system, and they have been also used as a catalyst or a catalyst support in the catalytic processes. Its textural and surface properties depend on the raw material and the method…

• DİLEK ANGIN YILMAZ

ABSTRACT Activated carbons have been widely used as adsorbents in the separation and purification processes for gaseous or aqueous solution system, and they have been also used as a catalyst or a catalyst support in the catalytic processes. Its textural and surface properties depend on the raw material and the method…

No abstract yet.

• BETÜL ERCAN