Oil and Gas Production Techniques

Introduction.The aim of this review is to explain the working principle of the cold press machine and discuss the effect of the extraction efficiency.The advantages and disadvantages of the extraction by means of cold press were explained by referring to other extraction methods. Material and method.The oil extraction…

• VASFİYE HAZAL ÖZYURT

Introduction. The aim of this review is to explain the working principle of the cold press machine and discuss the effect of the extraction efficiency. The advantages and disadvantages of the extraction by means of cold press were explained by referring to other extraction methods.

No abstract yet.

• SEZAİ TAŞKIN

Fluid loss during drilling operations has a very significant effect on both reservoir formation damage and monetary terms. There are many additives to control this unwanted phenomenon. Nevertheless, most of these substances are artificial chemicals. Thus, they are not only expensive, but also hazardous to the environm…

• MUSTAFA VERŞAN KÖK

The continuous and online monitoring of the condition of electrical machines is key to their safe operation. This study introduces a novel fault detection and diagnosis technique for continuous monitoring of faults in permanent magnet synchronous motors (PMSM). The proposed method relies solely on built-in sensors (st…

• OZAN KEYSAN

No abstract yet.

Power plants are the large-scale production facilities with the main purpose of realizing uninterrupted, reliable, efficient, economic and environmentally friendly energy generation. Maintenance is one of the critical factors in achieving these comprehensive goals, which are called as sustainable energy supply. The ma…

• RABİA YUMUŞAK

Power plants are the large-scale production facilities with the main purpose of realizing uninterrupted, reliable, efficient, economic and environmentally friendly energy generation. Maintenance is one of the critical factors in achieving these comprehensive goals, which are called as sustainable energy supply. The ma…

• EVRENCAN ÖZCAN
• TAMER EREN

No abstract yet.

• REDVAN GHASEMLOUNIA

No abstract yet.

• AMIN GHAREHBAGHI

No abstract yet.

• AMIN GHAREHBAGHI

:Comparing to pumps with moving parts water-jet pumps have a lower efficiency and surface roughness is an important factor for these types of pumps. The aim of this simulation study is to numerically determine how the scaling-up, downscaling and change in the absolute and relative roughness would impact on the energy…