Engineering and Materials Science Studies

No abstract yet.

• UĞUR ÖZSARAÇ

No abstract yet.

• FEHİM FINDIK

No abstract yet.

• MEHMET DURMAN

In this study, monofilament tubular braided structures were fabricated and their performances were analyzed. The braided tubes are in three-dimensional form, made of polyester monofilaments intended for use in medical applications. This type of structure, called a stent, is used to open clogged arteries and veins by e…

by Using Finite Element MethodSimuliranje naprezanja u kutnim spojevima drvenih konstrukcija primjenom metode konačnih elemenata

• HÜSEYİN YÖRÜR

by Using Finite Element MethodSimuliranje naprezanja u kutnim spojevima drvenih konstrukcija primjenom metode konačnih elemenata

• BÜLENT KAYGIN

In some rock mass classification methods, the point load index (PLI) value is used as a parameter in the determination of the class of rock mass.The PLI value may be used as a design parameter such as uniaxial compressive strength (UCS) and tensile strength (TS), owing to its being simpler, faster, and cheaper and eas…

• DENİZ AKBAY

In some rock mass classification methods, the point load index (PLI) value is used as a parameter in the determination of the class of rock mass.The PLI value may be used as a design parameter such as uniaxial compressive strength (UCS) and tensile strength (TS), owing to its being simpler, faster, and cheaper and eas…

Abstract Für die Beschreibung von Ergebnissen aus Kerbschlagbiegeversuchen gab es bisher keinen zufriedenstellenden analytischen Ausdruck. Unter den folgenden Annahmen wurde in dieser Arbeit eine Funktion für die Darstellung solcher Werte entwickelt: Kerbschlagwerte für rein spröden bzw. rein duktilen Bruch folgen lin…

• The SLJs under buckling were analysed experimentally and numerically. • Joints were optimized for strength and energy absorption. • The findings here shed light on the modelling of contemporary vehicle bumper. • The study covers experiments and simulations on joint failure and material degradation. Today's modern au…

• FERHAT KADIOĞLU

In this study, to minimize the corrosion rate zinc coatings conditions were optimized using a Box-Behnken design combined with response surface methodology. The different electro zinc coatings were obtained by changing three independent variables; the stirring rate (200–600 rpm), temperature of the bath (30–70°C) and…

• SİBEL ZOR

No abstract yet.