OpenAlex topic

Brake Systems and Friction Analysis

This page lists works and academicians tagged with an OpenAlex topic. It is not a YÖKSİS primary or secondary field.

OpenAlex 566 works 29 author topics

Works

566 works

On the measurement of friction coefficient utilizing the ring compression test 1999
YÖKSİS SJR Q1 JCR Q2 OpenAlex top 10% OpenAlex 90.5%
No abstract yet.
- HASAN SOFUOĞLU
The effects of applied load on the coefficient of friction in Cu MMC brake pad Al SiCp MMC brake disc system 2010
YÖKSİS SJR Q1 JCR Q1 OpenAlex top 10% OpenAlex 94.5%
No abstract yet.
- MİRAÇ ALAF
Microstructure hardness and electrical properties of silver based refractory contact materials 2003
YÖKSİS JCR Q3 OpenAlex top 10% OpenAlex 92.6%
No abstract yet.
- FEHİM FINDIK
An investigation on braking systems used in railway vehicles 2020
OpenAlex top 10% OpenAlex 93.8%
The high safety and comfort expectations under varying conditions have required the development of brake systems in railway vehicles. The main factors affecting the performance and function of the brake system are braking force, mass and speed of the vehicles, stopping or braking distance, railway condition and enviro…
Tribological properties of some phenolic composites suggested for automotive brakes 2006
YÖKSİS SJR Q1 JCR Q1 OpenAlex top 10% OpenAlex 94.9%
No abstract yet.
- FEHİM FINDIK
Tribological properties of some phenolic composites suggested for automotive brakes 2006
YÖKSİS SJR Q1 JCR Q1 OpenAlex top 10% OpenAlex 94.9%
No abstract yet.
- İBRAHİM MUTLU
- OSMAN ELDOĞAN
Nonlinear vibration analysis of bladed disks with dry friction dampers 2006
YÖKSİS SJR Q1 JCR Q2 OpenAlex top 10% OpenAlex 95.5%
No abstract yet.
- ENDER CİĞEROĞLU
Effects of Different Kinds of Fibers on Mechanical and Tribological Properties of Brake Friction Materials 2013
YÖKSİS OpenAlex top 10% OpenAlex 96.9%
The purpose of the present study is to compare the effects of different kinds of fibers on the mechanical and tribological properties (in dry conditions) of a phenolic resin–based friction material. The series of fibers used in the study include rockwool, ceramic, E-glass, and steel wool fibers. The fiber volume fract…
- BÜLENT ÖZTÜRK
Hot wear properties of ceramic and basalt fiber reinforced hybrid friction materials 2006
OpenAlex 89.1%
No abstract yet.
Effects of Resin Type and Fiber Length on the Mechanical and Tribological Properties of Brake Friction Materials 2011
YÖKSİS OpenAlex top 10% OpenAlex 92.7%
No abstract yet.
- BÜLENT ÖZTÜRK
Effect of Surface Roughness on Friction Coefficients During Upsetting Process for Different Materials 2007
YÖKSİS JCR Q2 OpenAlex 85.9%
No abstract yet.
- MÜMİN ŞAHİN
Fabrication and Arc-Erosion Behavior of Ag8SnO2 Electrical Contact Materials under Inductive Loads 2017
YÖKSİS SJR Q3 JCR Q3 OpenAlex 83.6%
In this study, Ag-based SnO2-reinforced electrical contact materials were produced by powder metallurgy and mechanical alloying techniques.Elemental powder mixture containing 8 wt.% SnO2 was milled in a highenergy planetary-type ball mill, to achieve homogeneously mixed composite powder, and subsequently pressed in a…
- MURAT AYDIN
- SERKAN BIYIK

Academicians

29 academicians