Skip to content
akaturk Academic measurement

Article detail · 2017 · article

Energy Consumption Analysis of Sintering Temperature Optimization of Pure Aluminum Powder Metal Compacts Sintered by Using The UHFIS

Journal International Journal of Engineering Researchand Development
ISSN1308-5514
YÖKSİS OpenAlex Open access · bronze TR Index
Year2017
Citations5OpenAlex
Percentile%60.6
FWCI0.341.00 = world average

Data source split

  • YÖKSİSYÖKSİS article record
  • YÖKSİS venueInternational Journal of Engineering Researchand Development
  • OpenAlexOpenAlex enrichment (abstract, citations, topics)
  • Semantic Scholarcitation count (not merged with OpenAlex)

Abstract

OpenAlex Turkish

In this study, pure aluminum (Al) powder metal (PM) compacts are sintered conventional or induction systems. PM compacts are sintered by furnace at 600 ° C in 60 minutes in the conventional sintering process. In the other process, PM compacts are sintered by induction system at seven different sintering temperatures from 550 ° C to 610 ° C in 4 minutes. 2.8 kW, 900 kHz ultra-high frequency induction system (UHFIS) used for heating application of induction sintering process. Densities and hardness values are investigated for both processes. During these sintering processes, all energy consumption results are measured and calculated, than compared with each other. The effects of the sintering time increase in the induction sintering process on energy cost have been analyzed. Optimum sintering temperature of the induction sintering process is determined. It has been seen that the cheaper energy cost is obtained by the induction system for sintering application.

Topics

Citations

OpenAlex cited_by_count. Not a WoS or Scopus citation count; those sources have no separate column here.

5citationsOpenAlex · cited_by_count (cache / database)

3 publications in the local catalog that cite this work (OpenAlex reference match; not the full global list).

  1. 2019 Alüminyum Matrisli Kompozitlerde Tungsten Karbür ve Grafen Takviyelerinin Mekanik Özelliklere Etkileri Üzerine Bir AraştırmaCitations 8 · OpenAlex
  2. 2020 Ultra-high frequency induction and conventional sintering of Al-SiO2 composites: A comparative studyCitations 6 · OpenAlex
  3. 2023 The investigation of mill scale utilization as a reinforcement in aluminum matrix compositesCitations 0 · OpenAlex

Authors

5
  1. MEHMET TAŞTAN MANİSA CELÂL BAYAR ÜNİVERSİTESİ 1
  2. HAYRETTİN GÖKOZAN 2
  3. PINAR ÇAVDAR İZMİR DEMOKRASİ ÜNİVERSİTESİ 3
  4. GÜRKAN SOY MANİSA CELÂL BAYAR ÜNİVERSİTESİ 4
  5. UĞUR ÇAVDAR İZMİR DEMOKRASİ ÜNİVERSİTESİ 5