Makale detayı · 2017
Energy Consumption Analysis of Sintering Temperature Optimization of Pure Aluminum Powder Metal Compacts Sintered by Using The UHFIS
International Journal of Engineering Researchand Development
- Yıl
- 2017
- ISSN
1308-5514- Tür
- article
Veri kaynağı ayrımı
- YÖKSİS YÖKSİS makale kaydı
- OpenAlex OpenAlex zenginleştirmesi (özet, atıf, konular)
Özet
Türkçe
In this study, pure aluminum (Al) powder metal (PM) compacts are sintered conventional or induction systems. PM compacts are sintered by furnace at 600 ° C in 60 minutes in the conventional sintering process. In the other process, PM compacts are sintered by induction system at seven different sintering temperatures from 550 ° C to 610 ° C in 4 minutes. 2.8 kW, 900 kHz ultra-high frequency induction system (UHFIS) used for heating application of induction sintering process. Densities and hardness values are investigated for both processes. During these sintering processes, all energy consumption results are measured and calculated, than compared with each other. The effects of the sintering time increase in the induction sintering process on energy cost have been analyzed. Optimum sintering temperature of the induction sintering process is determined. It has been seen that the cheaper energy cost is obtained by the induction system for sintering application.
Konular
- Aluminum Alloys Composites Properties
- Advanced ceramic materials synthesis
- Induction Heating and Inverter Technology
Birincil konu Aluminum Alloys Composites Properties