Article detail · 2009 · article
Effect of tensile stress on magnetoimpedance properties of CoNiFe Cu wire
Data source split
- YÖKSİSYÖKSİS article record
- YÖKSİS venueJournal of Physics D: Applied Physics
- Catalog match (ISSN)Journal of Physics D: Applied Physics
- OpenAlexOpenAlex enrichment (abstract, citations, topics)
- Semantic Scholarcitation count (not merged with OpenAlex)
Abstract
A Co 20.5 Ni 40.5 Fe 39 magnetic film was electrodeposited onto a copper wire 50 µm in diameter.The magnetoimpedance (MI) effect, ( Z/Z) H (%) = ((Z(H ) -Z max )/Z max ) × 100, was measured in the Co 20.5 Ni 40.5 Fe 39 /Cu composite wire under varying tensile stresses up to 30 MPa.The results showed that large MI and stress impedance (SI) effects can be observed in the Co 20.5 Ni 40.5 Fe 39 /Cu composite wire.The MI curve at zero tensile stress shows a small split peak in the low-field region.With increasing applied tensile stress, single-peak behaviour of the MI effect is observed.The magnitude of the MI and SI effects decreases with increasing tensile stress, σ .The peak values of ( Z/Z) H (%) for the sample decrease from 265% at σ = 0 to 39% at σ = 30 MPa at 40 kHz ac driving-current frequency.The impedance of a sample under the effect of 25 MPa tensile stress at 40 kHz ac driving-current frequency showed variations of about 146%.It was also found that the frequency value, f * , where the maximum MI effect was observed as a function of driving-current frequency, increases with increasing tensile stress.
Topics
Citations
OpenAlex cited_by_count. Not a WoS or Scopus citation count; those sources have no separate column here.
6citationsOpenAlex · cited_by_count (cache / database)