Additive Manufacturing and 3D Printing Technologies

No abstract yet.

• ERDİNÇ VURAL
• ERMAN AYDIN

3B baskı teknolojileri, birden fazla malzemenin katman katman birleştirilmesi sonucu nesnelerinin aynı platformda basılması sayesinde tek bir üretim sürecinde çok malzemeli yapıların imal edilmesine olanak tanımaktadır. Bu çalışmada, 3B yazıcı kullanılarak PLA Plus ve karbon fiber takviyeli PLA (PLA-CF)’dan üretilen ç…

In this study, salmon fish bone waste from the fish processing industry was converted into an inorganic ash filler by calcination and incorporated into an SLA-compatible photopolymer resin at 4, 8, and 12 wt.%. To compensate for filler-induced optical scattering and rheological changes, the printing parameters were sy…

The production of fiber-reinforced polymer composites using 3D printing technology offers significant potential and opportunities for industrial applications. However, current dimensional limitations in 3D printing necessitate the use of joining techniques to obtain larger components. Recently, innovative strategies s…

This study experimentally and statistically examined the effects of infill pattern, printing temperature, and annealing duration on the mechanical properties of PLA tensile samples produced using the fused filament fabrication method (FFF). The samples were produced in three different infill patterns (grid, zigzag, an…

Abstract In this study, the mechanical performance of triply periodic minimal surface (TPMS) structures under compression load, which are widely used in biomedical applications, was systematically investigated. The aim of the study was to compare the mechanical strength, energy absorption and surface-to-volume ratio o…

This study introduces a novel lightweight artificial aggregate manufactured using fused deposition modeling (FDM) 3D‑printing and evaluates its influence on the fresh, mechanical, physical, and durability performance of lightweight aggregate concrete (LWAC). Three aggregate geometries, spherical, edged, and irregular…

Artificial intelligence-assisted music production technologies have recently driven a significant transformation in production practices, shifting the paradigm from a centralized structure dependent on professional studios, high-cost hardware, and advanced expertise toward a more accessible, flexible, and software-cen…

No abstract yet.

This study systematically investigates the performance of conventional and auxetic lattice structures fabricated via Fused Deposition Modeling (FDM) by integrating production-related parameters with mechanical performance indicators. The primary novelty of this work lies in the systematic inclusion of manufacturing co…

In this study, the in situ frontal photopolymerization (FPP) of a 2-hydroxyethyl acrylate (2-HEA) and acrylamide (AAm) monomer system was efficiently carried out using bis(2,4,6-trimethylbenzoyl)phenylphosphine oxide (BAPO) as the photoinitiator, generating mechanically robust hydrogels with swelling ratios above 500%…

No abstract yet.