Effects of Formaldehyde Scavenger on Mechanical, Physical, and Emission Test Results in Multi-Layer Pressed Chipboard Production

OpenAlex English

This study investigates the effects of different formaldehyde scavenger (FS) ratios on the physical, mechanical, and chemical properties of fiberboard composites. Experimental analyses included measurements of thickness, density, modulus of rupture (MOR), modulus of elasticity (MOE), internal bond strength (IB), shear strength (SS), moisture content, thickness swelling (TS), water absorption (WA), and formaldehyde emission (FE) levels. The results indicate that an increase in the FS ratio leads to a significant decline in mechanical properties. Specifically, MOR, MOE, and IB values decreased by 17.97%, 15.65%, and 16.33%, respectively. Conversely, changes in TS and WA were observed, with TS increasing by up to 22.68% and WA decreasing by as much as 16.90%. In terms of formaldehyde emissions, a significant reduction was observed as the FS ratio increased. At the 15 ratio, formaldehyde emissions decreased by 43.24%, which is considered a positive outcome in terms of environmental and health impacts. Overall, the use of FS in specific ratios reduces FE while causing certain reductions in mechanical properties. These findings highlight the importance of optimizing FS usage for the production of low-FE fiberboards.