Skip to content
akaturk Academic measurement
Sign in Sign up

Article detail · 2011

Effect of production parameters on the physical and mechanical properties of particleboards made from peanut (Arachis hypogaea L.) hull

Journal

BioResources
OpenAlex Open access · gold SJR Q2 JCR Q1 Citations 51 Percentile 74.4% FWCI 1.19
Year
2011
DOI
10.15376/biores.6.4.5027-5036
Type
article

Data source split

  • YÖKSİS venue BioResources
  • OpenAlex OpenAlex enrichment (abstract, citations, topics)

OpenAlex record

Abstract

OpenAlex · English

In this study, effects of panel density and adhesive ratio on some physical and mechanical properties of peanut (Arachis hypogaea L.) hull particleboards for general purposes were investigated. Panels were manufactured with various densities (0.5, 0.6, 0.7, and 0.8 g/cm3) and adhesive ratios (core layer 8-9% and face layer 10-11%) using urea-formaldehyde (UF) as an adhesive. All panels were tested for some mechanical (internal bond, modulus of elasticity, and modulus of rupture) and physical (water absorption and thickness swelling) properties. Results indicated that increase in the panel density and adhesive ratio, resulted in an improvement in mechanical and physical properties. Only the panels with 0.8g/cm3 density almost met the requirements for the TS-EN 312 Standard for general purposes. Also, the boards having the lower mechanical properties tested in this study can be used as insulating material in buildings because such materials would not be subjected to any mechanical stress.

Topics

Citations

OpenAlex cited_by_count. Not a WoS or Scopus citation count; those sources have no separate column here.

51 citations

OpenAlex cited_by_count (cache / database)

11 publications in the local catalog that cite this work (OpenAlex reference match; not the full global list).

  1. Properties of Particleboard Produced from Red Pine (Pinus brutia) Chips and Lavender Stems 2015 Citations 10 · OpenAlex
  2. Feasibility of using waste sweet bay wood (Laurus nobilis L.) in particleboard production 2020 Citations 7 · OpenAlex
  3. Research on the production of the composite panels from some agricultural residues. 2015 Citations 7 · OpenAlex
  4. RESEARCH ON THE PRODUCTION OF THE COMPOSİTE PANELS FROM SOME AGRICULTURAL RESIDUES 2015 Citations 7 · OpenAlex
  5. Production of particleboards from licorice Glycyrrhiza glabra and European black pine Pinus Nigra Arnold wood particles 2015 Citations 5 · OpenAlex
  6. SOME PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLE BOARDS PRODUCED FROM INDUSTRIAL WOOD CHIPS AND SCOTS PINE (Pinus sylvestris) CONES 2025 Citations 3 · OpenAlex
  7. SOME PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLE BOARDS PRODUCED FROM INDUSTRIAL WOOD CHIPS AND SCOTS PINE (Pinu sylvestris) CONES 2025 Citations 3 · OpenAlex
  8. Research of suitability of some mechanical properties of particle board produced from cotton stalks to standards 2020 Citations 3 · OpenAlex
  9. Yonga Levha Üretiminde Motorlu Testere Talaşı Kullanımının Bazı Levha Özelliklerine Etkisi 2020 Citations 3 · OpenAlex
  10. SOME PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLE BOARDS PRODUCED WITH HAZELNUT HUSK AND ASTRAGALUS (Astragalus membranaceus) PLANT 2025 Citations 1 · OpenAlex

Authors

No author information.