Article detail · 2016
Copper Bipyridyl Redox Mediators for Dye-Sensitized Solar Cells with High Photovoltage.
- Year
- 2016
- Type
- article
Data source split
- YÖKSİS YÖKSİS article record
- YÖKSİS venue Journal of the American Chemical Society
- Catalog match (ISSN) Journal of the American Chemical Society
- OpenAlex OpenAlex enrichment (abstract, citations, topics)
Abstract
OpenAlex · English
Redox mediators play a major role determining the photocurrent and the photovoltage in dye-sensitized solar cells (DSCs). To maintain the photocurrent, the reduction of oxidized dye by the redox mediator should be significantly faster than the electron back transfer between TiO 2 and the oxidized dye. The driving force for dye regeneration with the redox mediator should be sufficiently low to provide high photovoltages. With the introduction of our new copper complexes as promising redox mediators in DSCs both criteria are satisfied to enhance power conversion efficiencies. In this study, two copper bipyridyl complexes, Cu (II/I) (dmby) 2 TFSI 2/1 (0.97 V vs SHE, dmby = 6,6′-dimethyl-2,2′-bipyridine) and Cu (II/I) (tmby) 2 TFSI 2/1 (0.87 V vs SHE, tmby = 4,4′,6,6′-tetramethyl-2,2′-bipyridine), are presented as new redox couples for DSCs. They are compared to previously reported Cu (II/I) (dmp) 2 TFSI 2/1 (0.93 V vs SHE, dmp = bis(2,9-dimethyl-1,10-phenanthroline). Due to the small reorganization energy between Cu(I) and Cu(II) species, these copper complexes can sufficiently regenerate the oxidized dye molecules with close to unity yield at driving force potentials as low as 0.1 V. The high photovoltages of over 1.0 V were achieved by the series of copper complex based redox mediators without compromising photocurrent densities. Despite the small driving forces for dye regeneration, fast and efficient dye regeneration (2–3 μs) was observed for both complexes. As another advantage, the electron back transfer (recombination) rates were slower with Cu (II/I) (tmby) 2 TFSI 2/1 as evidenced by longer lifetimes. The solar-to-electrical power conversion efficiencies for [Cu(tmby) 2 ] 2+/1+, [Cu(dmby) 2 ] 2+/1+, and [Cu(dmp) 2 ] 2+/1+ based electrolytes were 10.3%, 10.0%, and 10.3%, respectively, using the organic Y123 dye under 1000 W m –2 AM1.5G illumination. The high photovoltaic performance of Cu-based redox mediators underlines the significant potential of the new redox mediators and points to a new research and development direction for DSCs.
Topics
Citations
OpenAlex cited_by_count. Not a WoS or Scopus citation count; those sources have no separate column here.
297 citations
OpenAlex cited_by_count (cache / database)
16 publications in the local catalog that cite this work (OpenAlex reference match; not the full global list).
- Dye-sensitized solar cells for efficient power generation under ambient lighting 2017
- 11% efficiency solid-state dye-sensitized solar cells with copper(II/I) hole transport materials. 2017
- Comprehensive control of voltage loss enables 11.7% efficient solid-state dye-sensitized solar cells 2018
- Boosting the Efficiency of Perovskite Solar Cells with CsBr‐Modified Mesoporous TiO2 Beads as Electron‐Selective Contact 2017
- Metal Coordination Complexes as Redox Mediators in Regenerative Dye-Sensitized Solar Cells 2019
- Electrochemical Properties of Cu(II/I)-Based Redox Mediators for Dye-Sensitized Solar Cells 2016
- Electron-Affinity-Triggered Variations on the Optical and Electrical Properties of Dye Molecules Enabling Highly Efficient Dye-Sensitized Solar Cells. 2018
- Effect of Coordination Sphere Geometry of Copper Redox Mediators on Regeneration and Recombination Behavior in Dye-Sensitized Solar Cell Applications 2018
- Molecular Design of Efficient Organic D-A-π -A Dye Featuring Triphenylamine as Donor Fragment for Application in Dye-Sensitized Solar Cells. 2018
- Molecular Engineering of Simple Metal‐Free Organic Dyes Derived from Triphenylamine for Dye‐Sensitized Solar Cell Applications 2019