Article detail · 2014
Wear Behavior of TiAlN and CrAlN Coatings Deposited by TRD Process on AISI D2 Steel
- Year
- 2014
- ISSN
0587-4246- Type
- article
Data source split
- YÖKSİS YÖKSİS article record
- OpenAlex OpenAlex enrichment (abstract, citations, topics)
Abstract
English (OpenAlex)
The wear properties of uncoated, chromium aluminum nitride (CrAlN) and titanium aluminum nitride (TiAlN) coated AISI D2 steel were investigated and compared using ball-on-disc method at 0.3 m/s sliding speed and under the loads of 2.5 N, 5 N, and 10 N against Si3N4 ball as a counter material.Steel samples were nitrided at 575 • C for 8 h in the rst step of the coating process, and then titanium aluminum nitride coating and chromium aluminum nitride were performed by thermoreactive deposition (TRD) process at 1000 • C for 2 h.Coated samples were characterized by X-ray diraction analysis, scanning electron microscopy, microhardness, and ball on disk wear tests.The results of friction coecient and wear rate of the tested materials showed that the TiAlN coating presents the lowest results.
Topics
- Metal and Thin Film Mechanics
- Diamond and Carbon-based Materials Research
- Tribology and Wear Analysis
Primary topic Metal and Thin Film Mechanics