Article detail · 2025 · article
Effect of cooling rate on microstructure, mechanical and wear properties of Mg-2Zn and Mg-2Zn-1Mn alloys
Data source split
- YÖKSİSYÖKSİS article record
- YÖKSİS venueCanadian Metallurgical Quarterly
- Catalog match (ISSN)Canadian Metallurgical Quarterly
- OpenAlexOpenAlex enrichment (abstract, citations, topics)
- Semantic Scholarcitation count (not merged with OpenAlex)
Abstract
In this study, the wear characteristics of Mg-2Zn and Mg2Zn-1Mn alloys in both dry and corrosive conditions, as well as their mechanical properties dependent on cooling rate, were examined. It has been determined that MgZn, Mg2Zn3 and MgZn2 phases are formed together with the α-Mg main matrix in the microstructure of the alloys. The highest tensile strength (188.6 MPa) was observed in section B of Mg-2Zn alloy. With this, section A of the Mg-2Zn-1Mn alloy showed the lowest wear value (0.00144 mm3/N.m) following dry wear. However, under corrosive wear conditions, the lowest wear rate (0.0008 mm3/N.m) was exhibited at B section in Mg-2Zn-1Mn alloy. In the SEM images of the abrasive tips used in the wear tests, it was determined that the scratches occurred along the wear direction, and as a result of the EDX analysis, alloying elements were transferred from the alloys to the abrasive tip.
Topics
Citations
OpenAlex cited_by_count. Not a WoS or Scopus citation count; those sources have no separate column here.
1citationsOpenAlex · cited_by_count (cache / database)
2 publications in the local catalog that cite this work (OpenAlex reference match; not the full global list).