İçeriğe geç
akaturk Akademik ölçüm

Makale detayı · 2023 · article

Modeling and Assessment of the Thermo-Hydraulic Performance for a Fish Gill Patterned Plate Heat Exchanger in Biomimetic Approach

ISSN0145-7632
YÖKSİS OpenAlex Açık erişim · green
Yıl2023
Atıf7OpenAlex
Yüzdelik%55,3
FWCI0,521,00 = dünya ortalaması
Scopus (SJR)Q2
WoS (JCR)Q3

Veri kaynağı ayrımı

  • YÖKSİSYÖKSİS makale kaydı
  • YÖKSİS dergi adıHeat Transfer Engineering
  • Katalog eşleşmesi (ISSN)Heat Transfer Engineering
  • OpenAlexOpenAlex zenginleştirmesi (özet, atıf, konular)
  • Semantic Scholaratıf sayısı (OpenAlex ile birleştirilmez)

Özet

OpenAlex İngilizce

Increasing the surface area of ​​the plate heat exchangers (PHEs) has recently been one of the focuses of the industry. Improved surface shapes provide greater heat transfer and also become an important key point in energy saving. In this study, a fish-gill pattern is modeled on the plate surface and a thermo-hydraulic evaluation is performed on it. It is known that living respiratory organs such as fish gills are the natural heat exchangers that provide the best heat and mass transfer. Thus, the focus is on both increasing the compactness and heat transfer and reducing the pressure drop for PHEs. Comparative simulation studies are conducted between the fish-gill patterned PHE and the commercial Chevron PHE for water fluid. The study results show that the heat transfer rate of the fish gill patterned PHE is 15% higher compared to the Chevron PHE while the pressure drop is close. The compactness and efficiency values are also higher than those of the Chevron PHE. It is observed that the pressure consumption is higher because the surface geometry is complex, and the channels are narrow. Therefore, this study can be considered as a guide for the realization of PHE surface shape designs.

Konular

Atıflar

OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.

7atıfOpenAlex · cited_by_count (önbellek / veritabanı)

Yerel katalogda bu makaleye atıf yapan 6 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).

  1. 2025 Thermal-hydraulic performance optimization of plastic plate heat exchanger with lung flow channel using additive manufacturingAtıf 2 · OpenAlex
  2. 2025 Thermal-hydraulic performance optimization of plastic plate heat exchanger with lung flow channel using additive manufacturingAtıf 2 · OpenAlex
  3. 2025 Thermal-hydraulic performance optimization of plastic plate heat exchanger with lung flow channel using additive manufacturingAtıf 2 · OpenAlex
  4. 2025 Thermal-hydraulic performance optimization of plastic plate heat exchanger with lung flow channel using additive manufacturingAtıf 2 · OpenAlex
  5. 2026 Thermohydraulic comparison of PA12 and high temp resin lung-inspired plate heat exchangersAtıf 0 · OpenAlex
  6. 2023 Eş Merkezli İç İçe Borulu Isı Değiştiricisinde GO-Al2O3/Su Hibrit Nanoakışkanının Deneysel AnaliziAtıf 0 · OpenAlex

Yazarlar

6
  1. BARIŞ GÜREL SÜLEYMAN DEMİREL ÜNİVERSİTESİ 1
  2. ALİ KEÇEBAŞ MUĞLA SITKI KOÇMAN ÜNİVERSİTESİ 2
  3. VOLKAN RAMAZAN AKKAYA 3
  4. MERVE GÖLTAŞ 4
  5. ONUR VAHİP GÜLER 5
  6. KARANİ KURTULUŞ SÜLEYMAN DEMİREL ÜNİVERSİTESİ 6