Makale detayı · 2022 · article
Measurement of the elastic properties of epoxy resin/polyvinyl alcohol nanocomposites by ultrasonic wave velocities
Veri kaynağı ayrımı
- YÖKSİSYÖKSİS makale kaydı
- YÖKSİS dergi adıExpress Polymer Letters
- Katalog eşleşmesi (ISSN)Express Polymer Letters
- OpenAlexOpenAlex zenginleştirmesi (özet, atıf, konular)
- Semantic Scholaratıf sayısı (OpenAlex ile birleştirilmez)
Özet
The polyvinyl alcohol (PVA) nanofiber mats are produced using the electrospinning method.The epoxy resin (ER)/polyvinyl alcohol (PVA) nanocomposites are obtained by adding PVA nanofiber mats into neat epoxy resin (ER) as 5, 10, and 15 layers.The elastic properties (elastic constants, Young's modulus, Poisson's ratio, and Shear modulus) of the neat ER, and the ER/PVA nanocomposites, are determined by ultrasonic longitudinal wave velocity (V L ) and shear wave velocity (V S ) measurements.The morphology of the neat ER and the ER/PVA nanocomposites is investigated using scanning electron microscopy (SEM).The results obtained from SEM images showed the ER/PVA nanocomposites have a transversely isotropic structure.The V L value of isotropic neat ER was obtained higher than the value of V L33 and V L45° but lower in x(1) direction for V L11 in the ER/PVA nanocomposites.The velocity values of ultrasonic shear waves propagated in x(1) direction and polarized in y(2) direction in the ER/PVA nanocomposites are determined as higher than the velocity values of ultrasonic shear waves propagated in z(3) and polarized in x(1) direction.Also, the value of E 3 determined in the z(3) direction is found to be significantly higher than the value of E 1 determined in the x(1) direction when the number of PVA layers increased in the ER matrix.The value of shear modulus (G 31 ) is found as 1.53, 1.76, and 1.61 GPa for the ER/PVA-5, the ER/PVA-10, and the ER/PVA-15, respectively.The Poisson's ratio values of the ER/PVA nanocomposites are determined as between 0.473-0.502and 0.247-0.276for µ 11 and µ 31, respectively.On the other hand, the degree of anisotropy in the ER/PVA nanocomposites is determined using ratios of E 1 /E 3 and µ 11 /µ 31 .A small degree of anisotropy in dynamic Young's modulus (0.93-0.99) is observed, while a higher ratio is observed for Poisson's ratio (1.71-2.03)with increasing PVA layers in neat ER.
Konular
Atıflar
OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.
12atıfOpenAlex · cited_by_count (önbellek / veritabanı)
Yerel katalogda bu makaleye atıf yapan 8 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).
- 2023 Effect of High-Energy Ball Milling in Ternary Material System of (Mg-Sn-Na)Atıf 16 · OpenAlex
- 2023 Effect of High-Energy Ball Milling in Ternary Material System of (Mg-Sn-Na)Atıf 16 · OpenAlex
- 2023 The relationship between structural evolution and high energy ball milling duration in tin reinforced Mg alloysAtıf 13 · OpenAlex
- 2026 Ultrasonic characterization of transversely isotropic epoxy/multiwalled carbon nanotube reinforced polyvinyl alcohol nanofiber mats nanocompositesAtıf 3 · OpenAlex
- 2025 Ultrasonic characterization of transversely isotropic epoxy/multiwalled carbon nanotube reinforced polyvinyl alcohol nanofiber mats nanocompositesAtıf 3 · OpenAlex
- 2025 Elastic and acoustic properties determination of epoxy/polystyrene/nanoclay/red mud waste hybrid composites by ultrasonic methodAtıf 3 · OpenAlex
- 2025 Elastic and acoustic properties determination of epoxy/polystyrene/nanoclay/red mud waste hybrid composites by ultrasonic methodAtıf 3 · OpenAlex
- 2025 Characterization of the mechanical behavior of epoxy/date kernel powder biocomposites: A feasibility study of the powder size effectAtıf 1 · OpenAlex