Offshore Engineering and Technologies

Özet henüz yok.

• EMRE AKYÜZ

Özet henüz yok.

• UĞUR BUĞRA ÇELEBİ

Özet henüz yok.

• NURTEN VARDAR

Özet henüz yok.

• BİLGE BAŞ

Prognostics and health management (PHM) technologies reduce burdensome maintenance tasks of products or processes through diagnostic and prognostic activities.These activities provide actionable information that enable intelligent decision-making for improved performance, safety, reliability, and maintainability.Howev…

The hydrate inhibition potential of four different polymers has been tested in a high-pressure apparatus at high pressures and low temperatures. Aqueous polymer solutions were prepared at 1 wt % concentration. Methane (99.5% purity) was used as hydrate former gas. Hydrate formation rates of the tests were calculated t…

• MAHMUT PARLAKTUNA

Offshore wind farms are great options for addressing the world’s energy and climate change challenges, as well as meeting rising energy demand while taking environmental and economic impacts into account. Floating wind turbines, in specific, depict the next horizon in the sustainable renewable energy industry. In this…

• NURULLAH YILDIZ

A reasonable practice is to apply conventional fatigue life assessment methods to components with large threads when component S-N curves do not exist. Most recommended practices promote the use of the peak stress method. However, this method is bound to give conservative results for threaded components due to the hig…

• ALİ RIZA ÇETİN

Repair and maintenance is a critical technical aspect on board ship.Poor maintenance planning may lead to serious impairment in safety, efficiency, and environmental performance since researches show that a significant breakdowns and damage to ships with maintenance system.This study investigates the potential of exis…

• EMRE AKYÜZ
• METİN ÇELİK

Özet henüz yok.

Özet henüz yok.

• AHMET DURAP

Two-phase horizontal gravity separators are widely used in the petroleum industry. Design of these separators are based on empirical correlations and the design approach is described by the international standard API12J (American Petroleum Institute). Other literature provides different design approaches for defining…