OpenAlex konusu

Mechanical Failure Analysis and Simulation

Bu sayfa OpenAlex konu etiketine göre çalışmaları ve o konuda görünen akademisyenleri listeler. YÖKSİS temel alan / yan dal değildir.

OpenAlex 656 eser 22 yazar konusu

Çalışmalar

656 eser

Stress analysis of a truck chassis with riveted joints 2002
YÖKSİS SJR Q1 JCR Q2 OpenAlex 80.8%
Özet henüz yok.
- ÇİÇEK ÖZES
Fatigue failure of a helical gear in a gearbox 2006
YÖKSİS SJR Q1 JCR Q3 OpenAlex 81.0%
Özet henüz yok.
- OSMAN ASİ
Experimental and numerical fatigue-based design optimisation of clutch diaphragm spring in the automotive industry 2019
YÖKSİS SJR Q2 JCR Q3 OpenAlex üst %10 OpenAlex 95.1%
In the present study, the fatigue behaviour of a clutch diaphragm spring is investigated experimentally and numerically. Differential evolution optimisation algorithm and response surface methodology are used to define optimal variables of the diaphragm springs under constraints both minimum stress and required clamp…
- BETÜL SULTAN YILDIZ
Experimental and numerical fatigue-based design optimisation of clutch diaphragm spring in the automotive industry 2019
YÖKSİS SJR Q2 JCR Q3 OpenAlex üst %10 OpenAlex 95.1%
In the present study, the fatigue behaviour of a clutch diaphragm spring is investigated experimentally and numerically. Differential evolution optimisation algorithm and response surface methodology are used to define optimal variables of the diaphragm springs under constraints both minimum stress and required clamp…
- ALİ RIZA YILDIZ
Two cases of failure in the power transmission system on vehicles A universal joint yoke and a drive shaft 2007
YÖKSİS SJR Q1 JCR Q2 OpenAlex üst %10 OpenAlex 94.3%
Özet henüz yok.
- İBRAHİM YAVUZ
Stress analysis of shrink-fitted joints for various fit forms via finite element method 2005
YÖKSİS JCR Q3 OpenAlex 72.8%
Özet henüz yok.
- SADRİ ŞEN
Failure analysis of a crankshaft made from ductile cast iron 2006
YÖKSİS SJR Q1 JCR Q3 OpenAlex 85.0%
Özet henüz yok.
- OSMAN ASİ
Stress analysis of shrink fitted joints for various fit forms via finite element method 2005
YÖKSİS JCR Q3 OpenAlex 72.8%
Özet henüz yok.
- ADNAN ÖZEL
Stress analysis of shrink fitted joints for various fit forms via finite element method 2005
YÖKSİS JCR Q3 OpenAlex 72.8%
Özet henüz yok.
- MURAT DEMİR AYDIN
Failure of a diesel engine injector nozzle by cavitation damage 2006
YÖKSİS SJR Q1 JCR Q3 OpenAlex 86.4%
Özet henüz yok.
- OSMAN ASİ
Fatigue failure of a rear axle shaft of an automobile 2006
YÖKSİS SJR Q1 JCR Q3 OpenAlex 80.1%
Özet henüz yok.
- OSMAN ASİ
Numerical analysis of wheel cornering fatigue tests 2001
OpenAlex 87.2%
Özet henüz yok.

Akademisyenler

22 akademisyen