Electromagnetic Compatibility and Noise Suppression

This paper presents a new synchronous-reference-frame (SRF)-based control method to compensate power-quality (PQ) problems through a three-phase four-wire unified PQ conditioner (UPQC) under unbalanced and distorted load conditions. The proposed UPQC system can improve the power quality at the point of common coupling…

• ENGİN ÖZDEMİR

In this study, a new snubber cell is developed in order to increase the power density and the efficiency in pulsewidth modulation (PWM) converters and to decrease the EMI noise. The developed snubber cell provides main switch both to turn on with zero-voltage transition (ZVT) and to turn off with zero-current transiti…

• AHMET FARUK BAKAN

Özet henüz yok.

• GÜRKAN TUNA

Özet henüz yok.

• ŞAHRAM MİNAYİ

Özet henüz yok.

• ABDULLAH YEŞİL

A time-domain, non-Monte Carlo method for computer simulation of electrical noise in nonlinear dynamic circuits with arbitrary excitations and arbitrary large-signal waveforms is presented. This time-domain noise simulation method is based on results from the theory of stochastic differential equations. The noise simu…

• ALPER DEMİR

High intensity electromagnetic radiation has been demonstrated to be a source of computer upsets in commercially available digital flight control systems. Such upsets can degrade the quality of the control signal ranging from a perturbation error over a few sample periods to a permanent error mode or computer failure.…

• MUSTAFA DOĞAN

Noise arising from line-to-line coupling is a major problem for deep submicron design, and present technology trends are causing an increase in this type of noise. Common current methods to decrease coupling noise include shielding and buffering, both of which can increase overall power dissipation. An alternative met…

A fast time-domain integral equation (TE)-based scheme for analyzing transient electromagnetic compatibility and interference (EMC/EMI) problems involving printed circuit boards and cables/connectors that reside in shielding enclosures, is presented. The proposed algorithm hybridizes a classical marching-on-in-time (M…

Özet henüz yok.

• ABDULLAH YEŞİL

Hybrid active power filter (HAPF) consisting of passive filter and active filter in various configurations to each other has now become preferred technology for harmonic compensation in two wire, three wire and four wire ac power networks with nonlinear loads. This paper presents a detailed survey of hybrid active pow…

Neural networks (NNs) are widely used to create parametric models of S-parameters for various components in electronic systems. The focus of deriving these models has so far been numerical error reduction between the NN-generated S-parameters and the data source. However, this is not sufficient when creating such NNs…

• AHMET CEMAL DURGUN