İçeriğe geç
akaturk Akademik ölçüm
Giriş Kayıt

OpenAlex konusu

Metallurgy and Material Forming

Bu sayfa OpenAlex konu etiketine göre çalışmaları ve o konuda görünen akademisyenleri listeler. YÖKSİS temel alan / yan dal değildir.

OpenAlex 1.940 eser 104 yazar konusu

Çalışmalar

1.940 eser

  1. On localization and void coalescence as a precursor to ductile fracture 2015
    OpenAlex üst %1 OpenAlex 99.2%

    Two modes of plastic flow localization commonly occur in the ductile fracture of structural metals undergoing damage and failure by the mechanism involving void nucleation, growth and coalescence. The first mode consists of a macroscopic localization, usually linked to the softening effect of void nucleation and growt…

  2. Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding 2017
    OpenAlex üst %1 OpenAlex 99.2%

    Özet henüz yok.

  3. The growth and coalescence of ellipsoidal voids in plane strain under combined shear and tension 2011
    YÖKSİS SJR Q1 JCR Q1 OpenAlex üst %1 OpenAlex 99.3%

    Özet henüz yok.

  4. Temperature dependent flow softening of titanium alloy Ti6Al4V: An investigation using finite element simulation of machining 2011
    YÖKSİS SJR Q1 JCR Q1 OpenAlex üst %10 OpenAlex 98.7%

    Özet henüz yok.

  5. Void growth and coalescence in single crystals 2010
    YÖKSİS SJR Q1 JCR Q1 OpenAlex üst %1 OpenAlex 99.0%

    Özet henüz yok.

  6. Vibration analysis of rolling element bearings defects 2014
    YÖKSİS SJR Q2 JCR Q4 OpenAlex üst %10 OpenAlex 95.4%

    In this work, vibration analysis of rolling element bearings (REBs) defects is studied. The REBs are the most widelyused mechanical parts in rotating machinery under high load and high rotational speeds. When the defect in arolling element comes into contact with another element surface, an impact force is generated w…

  7. Analysis of forming limits using ductile fracture criteria 2004
    OpenAlex üst %10 OpenAlex 97.1%

    Özet henüz yok.

  8. An experimental study on the comparative assessment of hydraulic bulge test analysis methods 2011
    YÖKSİS JCR Q1 OpenAlex üst %10 OpenAlex 98.8%

    Özet henüz yok.

  9. Void growth and coalescence in ductile solids with stage III and stage IV strain hardening 2011
    YÖKSİS SJR Q1 JCR Q1 OpenAlex üst %1 OpenAlex 99.5%

    Özet henüz yok.

  10. A criterion for the onset of void coalescence under combined tension and shear 2012
    YÖKSİS SJR Q1 JCR Q1 OpenAlex üst %10 OpenAlex 98.9%

    Özet henüz yok.

  11. A study of spur gear pitting formation and life prediction 2004
    YÖKSİS SJR Q1 JCR Q1 OpenAlex üst %10 OpenAlex 94.7%

    Özet henüz yok.

  12. Simulation of roll forming process with the 3 D FEM code PAM STAMP 1996
    YÖKSİS SJR Q1 JCR Q3 OpenAlex üst %10 OpenAlex 91.9%

    Özet henüz yok.

Akademisyenler

104 akademisyen