OpenAlex konusu

Metal Forming Simulation Techniques

Bu sayfa OpenAlex konu etiketine göre çalışmaları ve o konuda görünen akademisyenleri listeler. YÖKSİS temel alan / yan dal değildir.

OpenAlex 1.968 eser 121 yazar konusu

Çalışmalar

1.968 eser

Review of warm forming of aluminum magnesium alloys 2008
YÖKSİS SJR Q1 JCR Q2 OpenAlex üst %1 OpenAlex 100.0%
Özet henüz yok.
- İLYAS KACAR
Review of warm forming of aluminum magnesium alloys 2008
YÖKSİS SJR Q1 JCR Q2 OpenAlex üst %1 OpenAlex 100.0%
Özet henüz yok.
- SERKAN TOROS
Review of warm forming of aluminum–magnesium alloys 2008
YÖKSİS SJR Q1 JCR Q2 OpenAlex üst %1 OpenAlex 100.0%
Özet henüz yok.
- FAHRETTİN ÖZTÜRK
Friction stir welding of dissimilar Al 6013 T4 To X5CrNi18 10 stainless steel 2005
YÖKSİS SJR Q1 JCR Q1 OpenAlex üst %10 OpenAlex 98.9%
Özet henüz yok.
- HÜSEYİN UZUN
On localization and void coalescence as a precursor to ductile fracture 2015
OpenAlex üst %1 OpenAlex 99.2%
Two modes of plastic flow localization commonly occur in the ductile fracture of structural metals undergoing damage and failure by the mechanism involving void nucleation, growth and coalescence. The first mode consists of a macroscopic localization, usually linked to the softening effect of void nucleation and growt…
Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding 2017
OpenAlex üst %1 OpenAlex 99.2%
Özet henüz yok.
Delamination wear in ductile materials containing second phase particles 1993
OpenAlex üst %10 OpenAlex 96.7%
Özet henüz yok.
The growth and coalescence of ellipsoidal voids in plane strain under combined shear and tension 2011
YÖKSİS SJR Q1 JCR Q1 OpenAlex üst %1 OpenAlex 99.3%
Özet henüz yok.
- CİHAN TEKOĞLU
Void growth and coalescence in single crystals 2010
YÖKSİS SJR Q1 JCR Q1 OpenAlex üst %1 OpenAlex 99.0%
Özet henüz yok.
- CİHAN TEKOĞLU
Investigating Formability Behavior of Friction Stir-Welded High-Strength Shipbuilding Steel using Experimental, Finite Element, and Artificial Neural Network Methods 2024
YÖKSİS SJR Q2 JCR Q3 OpenAlex üst %1 OpenAlex 99.9%
Özet henüz yok.
- MEHMET EMİN ÖZDEMİR
Plastic deformation and damage accumulation below the worn surfaces 1993
OpenAlex üst %10 OpenAlex 96.1%
Özet henüz yok.
Effect of welding parameters on lap shear tensile properties of dissimilar friction stir spot welded AA 5754-H22/2024-T3 joints 2013
OpenAlex üst %1 OpenAlex 99.2%
In this study, the effect of weld parameters on mechanical properties, such as lap shear fracture load, of friction stir spot welded dissimilar lap joints was studied. The effects of the plate positioning, the plunge depth and the dwell time as well as the tool tilt angle on the joint strength were investigated. The e…

Akademisyenler

121 akademisyen