OpenAlex konusu

Intermetallics and Advanced Alloy Properties

Bu sayfa OpenAlex konu etiketine göre çalışmaları ve o konuda görünen akademisyenleri listeler. YÖKSİS temel alan / yan dal değildir.

OpenAlex 1.323 eser 53 yazar konusu

Çalışmalar

1.323 eser

Microstructural Evolution and Phase Formation in Nanocrystalline Ti0.8V0.2C Powder During High-Energy Mechanical Alloying 2026
A nanostructured Ti0.8V0.2C solid solution carbide was successfully synthesized via high-energy mechanical alloying (MA) of elemental Ti, V, and C powders for 20 h in a planetary ball mill under argon atmosphere. Phase evolution and microstructural transformation were tracked using XRD, SEM/EDX, and TEM. Progressive a…
Effect of Manganese Content and Cooling Rate on the Formation of AlFeMn Intermetallic Phases in 8006 Aluminum Alloy 2026
Özet henüz yok.
Effect of heat treatment and cooling rate on phase transformation behavior of a Ti-rich NiTi shape memory alloy 2026
Abstract This study investigates the influence of heat treatment and cooling rate on the phase transformation behavior of a commercially obtained Ti–rich NiTi shape memory alloy (nominal composition Ni–47 at% and Ti–53 at%). The microstructural evolution, phase constitution, and transformation characteristics were sys…
Effect of Different Heat Treatment Temperatures on the Shape Memory Characteristics of a Co–Cr–Al–Si Alloy 2026
Özet henüz yok.
Effect of coating defects on the high-temperature oxidation resistance of Cr-coated zirconium alloy cladding 2026
Özet henüz yok.
Characterization of Aluminized Layers on Inconel‐738 Alloy: Microstructure, Modeling of Aluminizing Kinetics, and Thermal Behavior 2026
In the present study, kinetics and thermal behavior of the Inconel 738 alloy were studied by the low‐temperature thermoreactive aluminizing process, which was carried out at 625°C, 650°C, 675°C, and 700°C for 2, 4, and 6 h. The coating layer formed on the surface of the Inconel 738 alloy substrate was characterized by…
Critical niobium content in the compression performance and post-peak stability of porous Ti6Al–Nb alloys 2026
Abstract In this study, the effect of niobium (Nb) addition on the compressive properties of porous Ti6AlxNb ( x = 0, 2, 4, 8 wt.%) alloys produced by powder metallurgy was investigated using experimental and multivariate statistical analysis. Porous Ti6Al4V alloy was used as the reference material. Force–displacement…
Gözenekli biyomedikal TiAlNb malzemelerinin mikroyapısal ve mekanik karakterizasyonu 2026
Bu çalışmada, toz metalurjisi yöntemiyle üretilen gözenekli Ti–Al–Nb esaslı biyomedikal malzemelerin mikroyapısal ve mekanik özellikleri sistematik olarak incelenmiştir. Saf Ti, Ti-3Al-5Nb ve Ti-1Al-10Nb örnekleri, 300 MPa presleme basıncı altında 1300 °C’de 2 saat sinterlenmiştir. Mikroyapısal karakterizasyonlar opti…
Corrosion resistance and antibacterial properties of TiAl6Nb7 alloys coated with a zinc-doped calcium phosphate layer 2026
Özet henüz yok.
Transition-Metal Cation Intercalation in Mo₂CTₓ MXene: Intercalant-Dependent Structural Evolution 2026
Özet henüz yok.
Effect of aluminum powder concentration on phase evolution, defect structure, and mechanical performance of thermochemically aluminized Ni–Al coatings 2026
In the present study, the effect of aluminum powder concentration (5–20 wt.%) on structural and mechanical characteristics of Ni–Al coatings manufactured by a thermochemical aluminizing process was systematically investigated. The coatings were characterized in terms of phase constitution, average crystallite size, di…
Doğal Oksit Arayüz Tabakasının Metal-Oksit-Yarıiletken (Al/n-Si/Al) Yapısının Elektriksel Özelliklerine Etkisi 2026
Özet henüz yok.

Akademisyenler

53 akademisyen