Makale detayı · 2024
Halogen-free boron-based hybrid system for enhancing flame retardancy, mechanical and thermal properties of epoxy
- Yıl
- 2024
- Tür
- article
Veri kaynağı ayrımı
- YÖKSİS YÖKSİS makale kaydı
- YÖKSİS dergi adı JOURNAL OF APPLIED POLYMER SCIENCE
- Katalog eşleşmesi (ISSN) Journal of Applied Polymer Science
- OpenAlex OpenAlex zenginleştirmesi (özet, atıf, konular)
Özet
OpenAlex · İngilizce
Abstract This study aims to increase the flame retardancy of epoxy‐based composites by using various flame retardants together with colemanite filler (CLM), which is a very mineral‐rich boron type. As a flame retardant, aluminum hydroxide (Al(OH)3) and boron‐containing compounds: borax (BRX) and natural minerals (tincal (TNC) and colemanite (CLM)), as well as barium metaborate (BaMB) synthesized by us were used. Scanning electron microscopy (SEM), x‐ray powder diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), contact angle (CA), and particle size analysis were used to characterize the composites and additives. All boron compounds increased the thermal stability of the composites. Except for the ER/CLM‐BaMB composite, other composites' surface contact angles were over 90°. In terms of both combustion and thermal properties, the best CLM‐BaMB‐Al(OH)3‐TNC ratio was determined as 15:5:15:15. The tensile strength, self‐extinguishing time, estimated and experimental Limited Oxygen Index (LOI) values for this composite were determined as 96 MPa, 65 s, 29.6%, and 25%, respectively. In addition, ANOVA was applied to determine the effect of hybrid filler type and different weight ratios on the mechanical properties of composites.
Konular
Atıflar
OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.
13 atıf
OpenAlex cited_by_count (önbellek / veritabanı)
Yerel katalogda bu makaleye atıf yapan 19 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).
- Production and characterization of novel biodegradable films using fruit industrial waste and aloe vera gel 2024
- Nanocomposites based on MWCNT and nanoclay: Effect of acrylated epoxidized soybean oil on curing and composite properties 2024
- Hybrid epoxy composites based on tire waste-derived carbon black and eggshells with enhanced properties and aging life in different environmental conditions 2025
- Hybrid epoxy composites based on tire waste-derived carbon black and eggshells with enhanced properties and aging life in different environmental conditions 2025
- Appraisal of inorganic and lignocellulosic organic shell wastes as a green filler in epoxy-based hybrid composites 2025
- Appraisal of inorganic and lignocellulosic organic shell wastes as a green filler in epoxy-based hybrid composites 2025
- New biobased chitosan-modified peach kernel shell composites and examining their behavior in different environmental conditions 2024
- New biobased chitosan-modified peach kernel shell composites and examining their behavior in different environmental conditions 2024
- Itaconic acid based epoxy resin and application of olive pomace on the production of composite materials 2024
- Multi-walled carbon nanotubes and graphene oxide-based epoxy hybrid nanocomposites: Investigation of nanofiller modification effect 2025