Makale detayı · 2008
A fuzzy logic based device for the determination of temperature dependence of EDFAs
- Yıl
- 2008
- Tür
- article
Veri kaynağı ayrımı
- YÖKSİS YÖKSİS makale kaydı
- YÖKSİS dergi adı Microwave and Optical Technology Letters
- Katalog eşleşmesi (ISSN) Microwave and Optical Technology Letters
- OpenAlex OpenAlex zenginleştirmesi (özet, atıf, konular)
Özet
OpenAlex · İngilizce
Abstract In this study, a fuzzy logic (FL)‐based device is designed, constructed, and applied to a C band (1530–1565 nm) erbium‐doped fiber amplifier to obtain maximum signal gain and appropriate erbium‐doped fiber length for the temperature range between −20 and +60°C. The fuzzy rules—which are embedded into the circuit—are compiled using the input variables which are, namely, the signal wavelength and the temperature, whereas the output parameters are the signal gain and the appropriate fiber length providing the maximum signal gain. The FL‐based device provides the predictions for the fiber length providing the maximum signal gain against the input signal wavelength, and the temperatures within the accuracy level of 95–99%. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 2331–2334, 2008; Published online in Wiley InterScience (www.interscience.wiley.com).DOI 10.1002/mop.23699
Konular
Atıflar
OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.
19 atıf
OpenAlex cited_by_count (önbellek / veritabanı)
Yerel katalogda bu makaleye atıf yapan 13 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).
- Temperature independent length optimization of L band EDFAs providing flat gain 2011
- Temperature independent length optimization of L-band EDFAs providing flat gain 2011
- The Noise Figure Improvement Of Double Pass C Band EDFA 2013
- Determination of Minimum Temperature Coefficient of C Band EDFA 2008
- Fuzzy logic based device to implement a single CAD model for a laser diode based on characteristic quantities 2012
- Fuzzy logic based device to implement a single CAD model for a laser diode based on characteristic quantities 2012
- Design and implementation of fuzzy logic based automatic gain controller for EDFAs 2014
- RETRACTED — Simple and efficient ANN model proposed for the temperature dependence of EDFA gain based on experimental results 2012
- Determination of the temperature independent quiescent regions for different types of erbium-doped fibers 2019
- Determination of the Temperature Independent Quiescent Regions for Different Types of Erbium-Doped Fibers 2019