Makale detayı · 2021 · article
Using of recycled clay brick/fine soil to produce sodium hydroxide alkali activated mortars
Veri kaynağı ayrımı
- YÖKSİSYÖKSİS makale kaydı
- YÖKSİS dergi adıAdvances in Structural Engineering
- Katalog eşleşmesi (ISSN)Advances in Structural Engineering
- OpenAlexOpenAlex zenginleştirmesi (özet, atıf, konular)
- Semantic Scholaratıf sayısı (OpenAlex ile birleştirilmez)
Özet
In the study, the recycled clay brick powder/fine soil powder-based sodium hydroxide alkali-activated mortar (AAM) specimens were prepared by mixing different percentages (100/0, 80/20, 60/40, 40/60, 20/80, and 100/0, respectively) to investigate the mechanical and durability performance of sustainable AAM specimens for the possible utilization instead of OPC. The constant ratio of glass powder was used in the production of AAM to increase the alkalinity and improve the mechanical properties of alkali-activated mortar. Also, the influences of sodium hydroxide molarity concentrations (8, 10, 12, 14, and 16 M) on the performance of AAM specimens were studied. The compressive strength, water absorption, and water sorptivity tests were conducted on the AAM specimens and the relationships between the investigated parameters were analyzed. The obtained results revealed that the fine soil powder replacement with clay brick powder improved the compressive strength, and reduced water absorption and water sorptivity up to 80% replacement ratios, and the superior mechanical and durability performance was obtained in the 80% fine soil powder-based AAM specimens. For the higher fine soil powder replacement ratio (100%), the performances of the AAM specimens were found to be adversely affected. Besides, the concentration of NaOH solution significantly influenced the material performances of the fine soil powder-based AAMs and 12 M NaOH concentration performed superior mechanical and durability performance. The strength enhancement of the AAMs was found to be significant after 90 days of ambient curing period.
Konular
Atıflar
OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.
40atıfOpenAlex · cited_by_count (önbellek / veritabanı)
Yerel katalogda bu makaleye atıf yapan 17 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).
- 2022 Mechanical behavior of fiber reinforced slag-based geopolymer mortars incorporating artificial lightweight aggregate exposed to elevated temperaturesAtıf 58 · OpenAlex
- 2021 Mechanical behavior of fiber reinforced slag-based geopolymer mortars incorporating artificial lightweight aggregate exposed to elevated temperaturesAtıf 58 · OpenAlex
- 2024 One-part sodium carbonate-activated slag/r-MgO based mixes: Influence of nano-silica incorporation on compressive strength and microstructural developmentAtıf 18 · OpenAlex
- 2023 Effect of ceramic waste powder content and sodium hydroxide molarity on the residual mechanical strength of alkali-activated mortarsAtıf 18 · OpenAlex
- 2023 Effect of ceramic waste powder content and sodium hydroxide molarity on the residual mechanical strength of alkali-activated mortarsAtıf 18 · OpenAlex
- 2024 One-part sodium carbonate-activated slag/r-MgO based mixes: Influence of nano-silica incorporation on compressive strength and microstructural developmentAtıf 17 · OpenAlex
- 2023 Effect of ceramic waste powder content and sodium hydroxide molarity on the residual mechanical strength of alkali-activated mortarsAtıf 17 · OpenAlex
- 2025 Microstructural and Durability Assessment of Various Concrete Types Under Different Chemical EnvironmentsAtıf 12 · OpenAlex
- 2025 Microstructural and Durability Assessment of Various Concrete Types Under Different Chemical EnvironmentsAtıf 12 · OpenAlex
- 2024 Exploring flexural performance and abrasion resistance in recycled brick powder-based engineered geopolymer compositesAtıf 11 · OpenAlex