Makale detayı · 2018 · article
Investigation of high temperature wear resistance of TiCrAlCN/TiAlN multilayer coatings over M2 steel
Veri kaynağı ayrımı
- YÖKSİSYÖKSİS makale kaydı
- YÖKSİS dergi adıJournal of Adhesion Science and Technology
- Katalog eşleşmesi (ISSN)Journal of Adhesion Science and Technology
- OpenAlexOpenAlex zenginleştirmesi (özet, atıf, konular)
- Semantic Scholaratıf sayısı (OpenAlex ile birleştirilmez)
Özet
In this study, TiCrAlCN/TiAlN multilayer coatings were deposited on M2 high speed steel substrates by the Closed-Field Unbalanced Magnetron Sputtering system. The chemical composition, microstructure, morphology, mechanical and high temperature wear resistance properties of the coatings were characterized, analyzed and compared to the substrate. The high temperature wear tests were carried out under a load of 2 N at the lap (wear test distance) of 50 m and in dry sliding condition at Room Temperature (RT), 150, 300, 450, and 600 °C on atmospheric conditions. It has been found that the TiCrAlCN/TiAlN multilayer coatings have a higher wear resistance than the M2 substrate. The stable friction behavior and low friction tendency was determined at 600 °C. When the test temperature increased, the wear rates decreased. Narrow and smooth wear tracks and also the lowest wear rate were obtained at 600 °C.
Konular
Atıflar
OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.
8atıfOpenAlex · cited_by_count (önbellek / veritabanı)
Yerel katalogda bu makaleye atıf yapan 1 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).