Makale detayı · 2018
The effect of sintering time, temperature, and graphene addition on the hardness and microstructure of aluminum composites
- Yıl
- 2018
- Tür
- article
Veri kaynağı ayrımı
- YÖKSİS YÖKSİS makale kaydı
- YÖKSİS dergi adı JOURNAL OF COMPOSITE MATERIALS
- Katalog eşleşmesi (ISSN) Journal of Composite Materials
- OpenAlex OpenAlex zenginleştirmesi (özet, atıf, konular)
Özet
OpenAlex · İngilizce
Currently, graphene is used in aluminum matrix composite manufacturing due to its superior mechanical properties. However, few detailed studies exist on the effect of the process conditions such as sintering temperature ( T S ), time ( t S ), and a number of graphene nanoplatelets. Therefore, the effects of different sintering times ( t S = 60, 120, 180, 300 min), sintering temperatures ( T S = 550, 600, 630℃), and graphene addition (0.1, 0.3, 0.5 wt%) on apparent density and hardness were reported in detail in this study. The crystal structure and microstructure of fabricated composites by powder metallurgy method were examined with X-ray diffractometer and scanning electron microscopy. Apparent density and mechanical properties were tested by density meter and micro Vickers hardness tester. The results indicated that the best sintering time, sintering temperature, and graphene addition were determined to be 180 min, 630℃, and 0.1 wt%, respectively, for the best hardness of composite. The hardness of composite increased from 38 to 57 HV when compared with pure aluminum under the best process conditions.
Konular
Atıflar
OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.
115 atıf
OpenAlex cited_by_count (önbellek / veritabanı)
Yerel katalogda bu makaleye atıf yapan 44 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).
- Fabrication and Characterization of Synergistic Al-SiC-GNPs Hybrid Composites 2018
- Mechanical and Tribological Behaviors of Aluminum Matrix Composites Reinforced by Graphene Nanoplatelets 2018
- Mechanical and tribological behaviours of aluminium matrix composites reinforced by graphene nanoplatelets 2018
- Fabrication and characterization of novel layered materials produced by electroless plating and hot pressing 2020
- Effect of Al2O3 content and milling time on the properties of silver coated Cu matrix composites fabricated by electroless plating and hot pressing 2020
- Synergistic Effect of Graphene/Boron Nitride Binary Nanoparticles on Aluminum Hybrid Composite Properties 2021
- Repeated low-velocity impact responses of SiC particle reinforced Al metal-matrix composites 2022
- Fabrication and Characterization of Aluminum Hybrid Composites Reinforced with Silicon Nitride/Graphene Nanoplatelet Binary Particles 2019
- Dry Sliding Wear and Friction Behavior of Graphene/ZrO2 Binary Nanoparticles Reinforced Aluminum Hybrid Composites 2022
- Investigation on Mechanical Properties and Microstructure of B4C/Graphene Binary Particles Reinforced Aluminum Hybrid Composites 2021