İçeriğe geç
akaturk Akademik ölçüm

Makale detayı · 2019 · article

Structural and mechanical characterization of mullite and aluminium titanate reinforced yttria stabilized zirconia ceramic composites

YÖKSİS OpenAlex Açık erişim · diamond
Yıl2019
Atıf13OpenAlex
Yüzdelik%78,9
FWCI1,481,00 = dünya ortalaması
Scopus (SJR)Q4
WoS (JCR)Q4

Veri kaynağı ayrımı

  • YÖKSİSYÖKSİS makale kaydı
  • YÖKSİS dergi adıJOURNAL OF CERAMIC PROCESSING RESEARCH
  • Katalog eşleşmesi (ISSN)Journal of Ceramic Processing Research
  • OpenAlexOpenAlex zenginleştirmesi (özet, atıf, konular)

Özet

OpenAlex İngilizce

3 mole % yttria stabilized zirconia (YSZ) ceramic and 20 wt. % mullite (M), and 20 wt. % aluminium titanate (AT) reinforced YSZ ceramic composites were produced using a conventional ceramic production process. After a combined method of wet ball milling and dry pressing, these samples were sintered at 1500 degrees C and 1600 degrees C for 1hr and 5hrs, respectively. Physical properties, microstructural and phase characterizations of the sintered samples were analyzed using Archimedes method, a scanning electron microscope with energy dispersive spectroscopy and X-ray diffraction technique, respectively. Thereafter, micro Vickers and three-point bending tests were performed. The density, relative density and firing shrinkage of the sintered samples increased with addition of M and AT and the increased sintering temperature at each time. However, both porosity and loss of water properties determined were inversely proportional to M and AT addition and sintering temperature and time increase. An increase in M and AT content influenced the grain morphology as is presented in the microstructures of the composites produced thus bringing about a rise in grain size, as well as homogeneity and density in YSZ samples. Promising results were observed with the Vickers and bending strength in the mullite reinforced YSZ samples sintered at 1600 degrees C for 5hrs due to mullite addition, which provides excellent mechanical features to the YSZ ceramic composites.

Konular

Atıflar

OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.

13atıfOpenAlex · cited_by_count (önbellek / veritabanı)

Yerel katalogda bu makaleye atıf yapan 17 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).

  1. 2021 Fabrication and Characterization of Mullite Reinforced MgO Added ZrO2 CeramicsAtıf 5 · OpenAlex
  2. 2021 Fabrication and Characterization of Mullite Reinforced MgO Added ZrO2 CeramicsAtıf 5 · OpenAlex
  3. 2022 Fabrication and Characterization of Mullite Reinforced CeO2 Added ZrO2 CeramicsAtıf 2 · OpenAlex
  4. 2022 Fabrication and Characterization of Mullite Reinforced CeO2 Added ZrO2 CeramicsAtıf 2 · OpenAlex
  5. 2022 Fabrication and Characterization of Mullite Reinforced CeO2 Added ZrO2 CeramicsAtıf 2 · OpenAlex
  6. 2021 Fabrication and Characterization of Mullite Reinforced CaO Added ZrO2 CeramicsAtıf 2 · OpenAlex
  7. 2021 Fabrication and Characterization of Mullite Reinforced CaO Added ZrO2 CeramicsAtıf 2 · OpenAlex
  8. 2021 Macro to Atomic Scale Characterization of 3 mol% Yttria-Stabilized Tetragonal Zirconia Polycrystalline (3Y-TZP) Ceramics for Welding Pin ApplicationsAtıf 2 · OpenAlex
  9. 2021 Macro to Atomic Scale Characterization of 3 mol% Yttria-Stabilized Tetragonal Zirconia Polycrystalline (3Y-TZP) Ceramics for Welding Pin ApplicationsAtıf 2 · OpenAlex
  10. 2021 Macro to Atomic Scale Characterization of 3 mol% Yttria-Stabilized Tetragonal Zirconia Polycrystalline (3Y-TZP) Ceramics for Welding Pin ApplicationsAtıf 2 · OpenAlex

Yazarlar

2
  1. İSRAFİL KÜÇÜK 1
  2. TAHSİN BOYRAZ SİVAS CUMHURİYET ÜNİVERSİTESİ 2