İçeriğe geç
akaturk Akademik ölçüm

Makale detayı · 2015

Strength Comparison of Ductile and Brittle Adhesives under Single and Repeated Impacts

APPLIED ADHESION SCIENCE

YÖKSİS OpenAlex Açık erişim · hybrid SJR Q3 Atıf 10 Yüzdelik 68.9% FWCI 0.61
Yıl
2015
ISSN
2196-4351
Tür
article

Veri kaynağı ayrımı

  • YÖKSİS YÖKSİS makale kaydı
  • OpenAlex OpenAlex zenginleştirmesi (özet, atıf, konular)

Özet

İngilizce (OpenAlex)

In this study, the failure strengths of adhesively bonded joints were investigated. The glass fiber epoxy composites used as adherends were manufactured by using vacuum assisted resin infusion method (VARIM). The adhesively joint materials were Loctite-9466 and DP-460 as a brittle and ductile material, respectively. Since the strengths of these materials are close to each other under static loading, the applied axial energies were determined using different levels of 5, 10, 15 and 20 Joules. In order to determine the energy characteristics of the experiments, axial impact loadings were applied as both single and repeated three times under the same conditions. The results showed that the failure strengths of these two different adhesives of Loctite-9466 and DP460 changed depending on single and three times repeated axial impact loadings. This paper is intended to give an overview between ductile and brittle adhesives under both single and repeated impacts. In addition, it will help for designers who need information on mechanical properties of ductile and brittle adhesives under single and repeated impacts.

Konular

  • Mechanical Behavior of Composites
  • Structural Response to Dynamic Loads
  • Structural Behavior of Reinforced Concrete

Birincil konu Mechanical Behavior of Composites

Yazarlar

  1. UĞUR KEMİKLİOĞLU
  2. ONUR SAYMAN
  3. TURAN BATAR
  4. İBRAHİM FADIL SOYKÖK MANİSA CELÂL BAYAR ÜNİVERSİTESİ
  5. TARKAN AKDERYA
  6. ENDER AKAN