İçeriğe geç
akaturk Akademik ölçüm

Makale detayı · 2023 · article

Experimental Determination of the Optimum Cutting Tool for CNC Milling of 3d Printed Pla Parts

Dergi International Journal of 3D Printing Technologies and Digital Industry
ISSN2602-3350
YÖKSİS OpenAlex Açık erişim · hybrid TR Index
Yıl2023
Atıf7OpenAlex
Yüzdelik%57,3
FWCI0,51,00 = dünya ortalaması

Veri kaynağı ayrımı

  • YÖKSİSYÖKSİS makale kaydı
  • YÖKSİS dergi adıInternational Journal of 3D Printing Technologies and Digital Industry
  • OpenAlexOpenAlex zenginleştirmesi (özet, atıf, konular)
  • Semantic Scholaratıf sayısı (OpenAlex ile birleştirilmez)

Özet

OpenAlex İngilizce

The purpose of this study is to determine the most suitable cutting tool for achieving the desired diameter dimensions in parts produced using PLA material in a 3D printer. A plastic plate in the shape of a rectangular prism with dimensions of 90x40x10 mm was printed without holes with a 100% filling ratio in a 3D printer. A belt-pulley mechanism requiring bearing assembly was designed, manufactured, and tested for applicability. The study successfully identified the optimum parameters for achieving a 17 mm diameter measurement with the desired tolerance in PLA material without causing melt damage. These parameters are spindle speed of 15000 rpm, feed rate of 500 mm/min, cutting depth of 0.5 mm, minimum end mill diameter of 10 mm, and 4 cutting edges. The study also found that the morphological properties of the PLA workpiece were affected by the cutting process of different diameter milling cutters. The findings of this study can be useful for improving the accuracy and efficiency of 3D printing and CNC milling processes. This study provides important insights into the appropriate cutting tool for this process of parts produced using PLA material. The identified optimum parameters can help reduce energy-time-raw material losses and accumulation of waste PLA material, which are some of the most important problems of manufacturing with 3D printers.

Konular

Atıflar

OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.

7atıfOpenAlex · cited_by_count (önbellek / veritabanı)

Yerel katalogda bu makaleye atıf yapan 4 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).

  1. 2024 Investigation of The Effect of CNC Milling Cutting Process on The Tensile Test of PLA Samples Produced Using Two Different 3D Printers with The FDM MethodAtıf 4 · OpenAlex
  2. 2024 Investigation of The Effect of CNC Milling Cutting Process on The Tensile Test of PLA Samples Produced Using Two Different 3D Printers with The FDM MethodAtıf 4 · OpenAlex
  3. 2025 THE EFFECT OF FDM PROCESS PARAMETERS ON THE MACHINABILITY OF PET-G MATERIAL: DELAMINATION ANALYSIS USING THE TAGUCHI APPROACHAtıf 2 · OpenAlex
  4. 2025 Experimental investigation of the parameters affecting the surface roughness of materials with different thicknesses by abrasive water jetting: Polymer, composite and elastomer materialsAtıf 1 · OpenAlex

Yazarlar

2
  1. FUAT KARTAL KASTAMONU ÜNİVERSİTESİ 1
  2. ARSLAN KAPTAN SİVAS CUMHURİYET ÜNİVERSİTESİ 2