Makale detayı · 2017 · article
Improvement of wear behaviour of titanium by boriding
Veri kaynağı ayrımı
- YÖKSİSYÖKSİS makale kaydı
- YÖKSİS dergi adıINDUSTRIAL LUBRICATION AND TRIBOLOGY
- Katalog eşleşmesi (ISSN)Industrial Lubrication and Tribology
- OpenAlexOpenAlex zenginleştirmesi (özet, atıf, konular)
- Semantic Scholaratıf sayısı (OpenAlex ile birleştirilmez)
Özet
Purpose The purpose of this paper is to achieve a hard and protective borided layer on commercially pure Ti (grade-2) by applying boriding, and to investigate the changes in its microstructure, hardness, friction and wear behaviors. Design/methodology/approach Pack boriding technique was used to form a hard boron diffusion layer on titanium substrate. A powder mixture of amorphous boron and anhydrous borax was used as a solid-state boriding media, and then the boriding was carried out under inert atmosphere. Findings A thick dual boride layer consisting of a monolithic titanium diboride (TiB2) on the top and titanium monoboride (TiB) whiskers beneath that layer formed at relatively low diffusion temperature under pressured inert argon atmosphere in a boriding media containing boron source and activator. With boriding at specified conditions, very hard (4100 Hv0.01) and thick monolithic TiB2 layer formed on the top-most layer which is required for improved tribological applications. Hardness decreased gradually through the TiB whisker layer and finally reached to the hardness of base material. Originality/value This paper investigates the effects of components of boriding mixture and conditions of thermal treatment on the formation of borided layer and its properties. In previous studies, boriding mixtures containing a boron source, an activator and a filler material was generally used at high temperatures around or above 1,050°C to achieve a thick monolithic layer on the top of the surface of titanium. In the present study, no filler material was used to accelerate the boron diffusion because filler materials may inhibit the diffusion of boron atom through the surface of substrate of titanium. Also, diffusion treatment was carried out under pressurized argon atmosphere at relatively low diffusion temperature to achieve boride layer with the improved hardness and durability.
Konular
Atıflar
OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.
21atıfOpenAlex · cited_by_count (önbellek / veritabanı)
Yerel katalogda bu makaleye atıf yapan 12 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).
- 2022 Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatingsAtıf 74 · OpenAlex
- 2022 Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatingsAtıf 74 · OpenAlex
- 2022 Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatingsAtıf 74 · OpenAlex
- 2019 Boriding behaviour of titanium alloys with different crystalline structuresAtıf 33 · OpenAlex
- 2018 Growth kinetics and mechanical characterization of boride layers formed on β-type Ti-45Nb alloyAtıf 31 · OpenAlex
- 2020 Mechanical properties and cell proliferation response of borided biomedical titanium alloys with different crystalline structuresAtıf 18 · OpenAlex
- 2020 Mechanical properties and cell proliferation response of borided biomedical titanium alloys with different crystalline structuresAtıf 18 · OpenAlex
- 2023 Enhancing the wear performance of Ti-6Al-4V against Al2O3 and WC-6Co via TiBn layer produced by boridingAtıf 9 · OpenAlex
- 2021 Characterization of Boride Layer Formed on Ti–6Al–4V Alloy by Electron Beam Evaporation TechniqueAtıf 9 · OpenAlex
- 2025 Wear behaviour of borided α, α plus β and β Titanium alloysAtıf 1 · OpenAlex