Makale detayı · 2021 · article
Surface roughness of thermally treated wood cut with different parameters in CNC router machine
Veri kaynağı ayrımı
- YÖKSİSYÖKSİS makale kaydı
- YÖKSİS dergi adıBioResources
- Katalog eşleşmesi (ISSN)BioResources
- OpenAlexOpenAlex zenginleştirmesi (özet, atıf, konular)
- Semantic Scholaratıf sayısı (OpenAlex ile birleştirilmez)
Özet
The effects of different machining parameters on surface roughness values of thermally treated pine, beech, and linden woods cut in a computer numerical control (CNC) router machine were examined. Wood specimens were thermally treated at 170, 190, and 210 °C for 2 h. Then, specimens were cut in the radial and tangential directions with three different spindle speeds (12000, 15000, and 18000 rpm) and three different feed rates (3000, 4000, and 6000 mm/min) using two different end mill tools (spiral and straight) on the CNC machine. The end mill type significantly affected the roughness values of the untreated and thermally treated specimens in both directions. Lower roughness values were found in the specimens (especially pine) machined with the straight end mill compared to those machined with the spiral end mill. Roughness generally decreased in the thermally treated specimens. However, thermal treatment temperature did not have a notable effect on roughness. As the spindle speed increased, the roughness values of all specimens decreased. In contrast, as the feed rate increased, the roughness values increased. Therefore, the end mill type, feed rate, and spindle speed were the most influential parameters on the roughness.
Konular
Atıflar
OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.
20atıfOpenAlex · cited_by_count (önbellek / veritabanı)
Yerel katalogda bu makaleye atıf yapan 11 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).
- 2022 Effects of CNC Processing Parameters on Surface Quality of Wood-Based Panels Used in Furniture IndustryAtıf 16 · OpenAlex
- 2022 Effects of CNC Processing Parameters on Surface Quality of Wood-Based Panels Used in Furniture IndustryAtıf 16 · OpenAlex
- 2023 Optimization of wood machining parameters using artificial neural network in CNC routerAtıf 13 · OpenAlex
- 2023 Determination of the machining characteristics of Uludağ fir (Abies nordmanniana Mattf.) densified by compressingAtıf 12 · OpenAlex
- 2023 Determination of the machining characteristics of Uludağ fir (Abies nordmanniana Mattf.) densified by compressingAtıf 12 · OpenAlex
- 2025 The effect of the Aspect and machining parameters on CNC machining of solid wood materialAtıf 2 · OpenAlex
- 2026 Entropy and EDAS-based multi-criteria decision-making approach to optimize CNC machining parametersAtıf 1 · OpenAlex
- 2024 Identification of optimal cutting parameters regarding lacquer wettability of CNC processed MDF panels by artificial neural networkAtıf 1 · OpenAlex
- 2025 Optimization of CNC Machining Parameters Using Entropy and EDAS-Based Multi-Criteria Decision-Making ApproachAtıf 0 · OpenAlex
- 2025 The impact of aging on the properties of heat-treated iroko wood used as a terrace deck for 10 yearsAtıf 0 · OpenAlex