İçeriğe geç
akaturk Akademik ölçüm

Makale detayı · 2012 · article

Carbothermic reduction of electric arc furnace dust and calcination of waelz oxide by semi-pilot scale rotary furnace

YÖKSİS OpenAlex Açık erişim · diamond
Yıl2012
Atıf76OpenAlex
Yüzdelik%78,8
FWCI1,271,00 = dünya ortalaması
Scopus (SJR)Q1
WoS (JCR)Q1

Veri kaynağı ayrımı

  • YÖKSİSYÖKSİS makale kaydı
  • YÖKSİS dergi adıJournal of Mining and Metallurgy, Section B: Metallurgy
  • Katalog eşleşmesi (ISSN)Journal of Mining and Metallurgy, Section B: Metallurgy
  • OpenAlexOpenAlex zenginleştirmesi (özet, atıf, konular)
  • Semantic Scholaratıf sayısı (OpenAlex ile birleştirilmez)

Özet

OpenAlex İngilizce

The paper gives a common outline about the known recycling techniques from electric arc furnace dusts and describes an investigation of a pyrometallurgical process for the recovery of zinc and iron from electric arc furnace dusts (EAFD). In the waelz process, the reduction of zinc and iron from the waste oxides using solid carbon (lignite coal) was studied. In the reduction experiments; temperature, time and charge type (powder and pellet) were investigated in detail. It was demonstrated that zinc and iron recovery (%) increases with increasing temperature as well as time. Pelletizing was found to be a better method than using the powder as received for the zinc recovery and iron conversion (). In the calcination (roasting) process, crude zinc oxide, which evaporated from non-ferric metals were collected as condensed product (crude waelz oxide), was heated in air atmosphere. Lead, cadmium as well as chlorine and other impurities were successfully removed from crude waelz oxide by this method. In the calcination experiments; temperature and time are investigated in detail. It was demonstrated that zinc purification (%) increases with increasing temperature. The highest zinc refining (%) was obtained at 1200?C for 120 minutes. A kinetic study was also undertaken to determine the activation energy of the process. Activation energies were 242.77 kJ/mol for the zinc recovery with powder forms, 261.99 kJ/mol for the zinc recovery with pellet forms respectively. It was found that, initially, the reaction was chemically controlled.

Konular

Atıflar

OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.

76atıfOpenAlex · cited_by_count (önbellek / veritabanı)

Yerel katalogda bu makaleye atıf yapan 15 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).

  1. 2015 Optimization of selective leaching of Zn from electric arc furnace steelmaking dust using response surface methodologyAtıf 61 · OpenAlex
  2. 2015 Optimization of selective leaching of Zn from electric arc furnace steelmaking dust using response surface methodologyAtıf 61 · OpenAlex
  3. 2015 Optimization of selective leaching of Zn from electric arc furnace steelmaking dust using response surface methodologyAtıf 61 · OpenAlex
  4. 2015 Optimization of selective leaching of Zn from electric arc furnace steelmaking dust using response surface methodologyAtıf 61 · OpenAlex
  5. 2014 Adsorption of copper and zinc from sulfate media on a commercial sorbentAtıf 50 · OpenAlex
  6. 2014 Adsorption of copper and zinc from sulfate media on a commercial sorbentAtıf 50 · OpenAlex
  7. 2014 Adsorption of copper and zinc from sulfate media on a commercial sorbentAtıf 49 · OpenAlex
  8. 2014 Adsorption of copper and zinc from sulfate media on a commercial sorbentAtıf 49 · OpenAlex
  9. 2014 Adsorption of copper and zinc from sulfate media on a commercial sorbentAtıf 49 · OpenAlex
  10. 2014 Dissolution of copper and iron from malachite ore and precipitation of copper sulfate pentahydrate by chemical processAtıf 44 · OpenAlex

Yazarlar

4
  1. MEHMET HAKAN MORCALI GAZİANTEP ÜNİVERSİTESİ 1
  2. ONURALP YÜCEL İSTANBUL TEKNİK ÜNİVERSİTESİ 2
  3. ADNAN AYDIN 3
  4. CEVAT BORA DERİN İSTANBUL TEKNİK ÜNİVERSİTESİ 4