Makale detayı · 2022
Life cycle assessment of binary recycled ceramic tile and recycled brick waste-based geopolymers
- Yıl
- 2022
- Tür
- article
Veri kaynağı ayrımı
- YÖKSİS YÖKSİS makale kaydı
- YÖKSİS dergi adı Cleaner Materials
- Katalog eşleşmesi (ISSN) Cleaner Materials
- OpenAlex OpenAlex zenginleştirmesi (özet, atıf, konular)
Özet
OpenAlex · İngilizce
This paper consists of a life cycle assessment (LCA) analysis on an experimental study to produce recycled brick waste (RBW) and recycled ceramic tile (RCT) based geopolymers. The LCA analysis is done following ISO 14040 standards on GaBi software for geopolymers produced with different ingredients ratios and curing types/regimes. The binary geopolymer comes from RBW + RCT (Phase I) as aluminosilicate sources and alkaline solutions. The ternary geopolymer (Phase II) studied includes Class C Fly ash (FC) in addition to the RBW + RCT. And finally, for Phase III, the binary geopolymer is cured at 100 °C. The life cycle impact assessment (LCIA) methodology using TRACI 2.0 and the GaBi databases is used to calculate the following impact categories: Global Warming Potential (GWP), Acidification Potential (AP), Eutrophication Potential (EP), Ozone Depletion Potential (ODP) and smog. The LCA analysis is also modelled on a large-scale industrial basis. This results in decreased environmental impacts, and they are 1352 kg CO2-eq, 3.01 kg SO2-eq, 0.19 kg N-eq, 6.56E-9 kg CFC 1-eq for GWP, AP, EP, and ODP, respectively.
Konular
Atıflar
OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.
36 atıf
OpenAlex cited_by_count (önbellek / veritabanı)
Yerel katalogda bu makaleye atıf yapan 11 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).
- 3D printing of circular materials: Comparative environmental analysis of materials and construction techniques 2023
- A comprehensive study on the compressive strength, durability-related parameters and microstructure of geopolymer mortars based on mixed construction and demolition waste 2023
- Characterization and life cycle assessment of geopolymer mortars with masonry units and recycled concrete aggregates assorted from construction and demolition waste 2023
- The impact of nozzle diameter and printing speed on geopolymer-based 3D-Printed concrete structures: Numerical modeling and experimental validation 2024
- Characterization and life cycle assessment of geopolymer mortars with masonry units and recycled concrete aggregates assorted from construction and demolition waste 2023
- Effect of industrial waste-based precursors on the fresh, hardened and environmental performance of construction and demolition wastes-based geopolymers 2023
- Buildability analysis on effect of structural design in 3D concrete printing (3DCP): An experimental and numerical study 2023
- Construction and demolition waste-based geopolymers for built-environment: An environmental sustainability assessment 2022
- Buildability analysis on squared profile structure in 3D concrete printing (3DCP) 2023
- Atık Seramiklerin Çimento Esaslı Seramik Yapıştırıcılarda Alternatif Hammadde Olarak Kullanımı: Bir Literatür İncelemesi 2026