Makale detayı · 2008
Energy scavenging from low frequency vibrations by using frequencyup conversion for wireless sensor applications
- Yıl
- 2008
- Tür
- article
Veri kaynağı ayrımı
- YÖKSİS YÖKSİS makale kaydı
- YÖKSİS dergi adı IEEE SENSORS JOURNAL
- Katalog eşleşmesi (ISSN) IEEE Sensors Journal
- OpenAlex OpenAlex zenginleştirmesi (özet, atıf, konular)
Özet
OpenAlex · İngilizce
This paper presents an electromagnetic (EM) vibration-to-electrical power generator for wireless sensors, which can scavenge energy from low-frequency external vibrations. For most wireless applications, the ambient vibration is generally at very low frequencies (1-100 Hz), and traditional scavenging techniques cannot generate enough energy for proper operation. The reported generator up-converts low-frequency environmental vibrations to a higher frequency through a mechanical frequency up-converter using a magnet, and hence provides more efficient energy conversion at low frequencies. Power is generated by means of EM induction using a magnet and coils on top of resonating cantilever beams. The proposed approach has been demonstrated using a macroscale version, which provides 170 nW maximum power and 6 mV maximum voltage. For the microelectromechanical systems (MEMS) version, the expected maximum power and maximum voltage from a single cantilever is 3.97 muW and 76 mV, respectively, in vacuum. Power level can be increased further by using series-connected cantilevers without increasing the overall generator area, which is 4 mm2. This system provides more than an order of magnitude better energy conversion for 10-100 Hz ambient vibration range, compared to a conventional large mass/coil system.
Konular
Atıflar
OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.
359 atıf
OpenAlex cited_by_count (önbellek / veritabanı)
Yerel katalogda bu makaleye atıf yapan 10 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).
- A Vibration Based Electromagnetic Energy Harvester Using Mechanical Frequency Up Conversion Method 2011
- An electromagnetic energy harvesting system for low frequencyapplications with a passive interface ASIC in standard CMOS 2012
- A MEMS based energy harvester for generating energy from non resonantenvironmental vibrations 2013
- A comparative study of modified strain gradient theory and modified couple stress theory for gold microbeams 2018
- An interface circuit prototype for a vibration-based electromagnetic energy harvester 2010
- An electromagnetic energy harvester for low frequency and low-g vibrations with a modified frequency up conversion method 2013
- Hybrid energy harvesting from keyboard 2011
- A mechanical frequency up-conversion mechanism for vibration based energy harvesters 2009
- Efficient energy scavengers by flexible robot arm with non uniform cross section 2012
- Efficient Energy Harvesting Systems for Vibration and Wireless Sensor Applications 2017