Tailoring Wear Properties of Nodular Cast Iron through Induction Hardening Optimization

OpenAlex İngilizce

Abstract The current study investigated the wear performances of GGG60 nodular cast iron under different loads after induction hardening at different powers and durations. The background of this study is the optimization of induction hardening parameters applied to increase the wear resistance of GGG60 nodular cast iron, which is the raw material of parts subjected to high wear loads such as crankshafts, gear systems and flywheels. With the obtained wear results, the induction parameters were optimized by RSM. Induction hardening was treated at four induction powers and two induction durations. Wear tests were conducted using the ball-on-disc method under dry wear conditions for 60 min. Three different wear loads of 10, 20, and 30 N were used. The samples were analyzed in terms of microstructure, hardness, and wear characterization. Subsequently, a RSM model was constructed using the wear results Untreated specimens have significantly lower performance characteristics than treated ones. The hardness, penetration depth, and wear performance indicated a strong relationship with the increase in both induction power and duration. The optimization model presented that the most critical parameter of volume loss is the wear load. In addition, induction power and wear load were found to be significant in the wear rate. The model's prediction capacity for volume loss is satisfactory. Nevertheless, the model's prediction capacity for the wear rate experienced a slight decrease. Conclusions indicate the model can estimate the induction hardening parameters.