Use of Submarine Tailings Disposal as Alternative Tailings Management System

OpenAlex İngilizce

The importance of the mining/milling industry in increasing the growth level and welfare of countries is quite high. However, at the end of mining/milling processes, huge amounts of waste (often known as tails) are inevitably produced that have no economic value and can even be considered dangerous due to some heavy metals they contain. These tails are highly problematic due to both their volume (difficult to manage environmentally) and toxicity (potential to cause acid/leach waters) and need to be handled outside of existing disposal methods. This article presents the effective and sustainable handling and application of tails resulting from the enrichment of copper–zinc ores, which are actively engaged in metallic mining activities in the northeast of Türkiye, with the submarine tails disposal (STD) method. In the mining operation under study, some (~55–60 wt.%) of the tails are employed as underground fill, even though the residual part is disposed of by the STD method. The characterization of ore beneficiation tails, their transportation to the subsea via a pipeline system, and discharge monitoring results are detailed in the present investigation. According to the limitations which are indicated by the Turkish Control of Water Contamination regulation, the concentration of Pb-Cu found in the results was under the allowable limit of 0.05 mg/L. The allowed 2 mg/L limit for Zn was not surpassed mainly by the concentration found in the collected samples. pH values were almost above the allowable limit of pH > 5. The results reveal that the STD technique works quite well as an integrated mine tails method in the mine under study.